Libnor | المعايير |

Document Number: NL ISO 3877 1 : 2005

This European Standard describes the reference method, used for type testing and in case of dispute, for determination of the flakiness index of aggregates. For other purposes, in particular production control, other methods may be used, provided that an appropriate working relationship with the reference method has been established. This European Standard applies to natural, manufactured or recycled aggregates. The test procedure specified in this part of this European Standard is not applicable to particle sizes less than 4 mm or greater than 100 mm.

Tyres, valves, and tubes – List of equivalent terms – Part 1: Tyres

Document Number: NL ISO 3877 2 : 2005

This part of ISO 3877 presents a list of equivalent tyre terms commonly used in the tyre industry. The terms are arranged in three columns. The first column gives the English terms in alphabetical order. The second column gives the English terms used in the USA and it should be noted that such terms are not necessarily in alphabetical order. An alphabetical index of the English (USA) terms is located at the end of this part of ISO 3877. The third column gives the equivalent French terms. In each column, synonyms are separated by a semicolon (;). Some of the basic terms relating to tyres are illustrated in figures 1 and 2. Definitions of some terms presented in this part of ISO 3877 are given in ISO 4223-1 and ISO 4223-2. For terms relating to wheels/rims and definitions, see ISO 3911

Tyres, valves, and tubes – List of equivalent terms – Part 2: Tyre Valves

Document Number: NL ISO 3877 3 : 2005

This part of ISO 3877 presents a list of equivalent tyre valve terms commonly used in the tyre industry. The terms are arranged in two columns. The first column gives the English terms in alphabetical order. The second column gives the equivalent French terms. In each column, synonyms are separated by a semicolon (;). The figures of annex A illustrate some of the terms presented in this part of ISO 3877. The figures are intended to illustrate and define terminology commonly used and do not imply any technical standard.

Tyres, valves, and tubes – List of equivalent terms – Part 3: Tubes

Document Number: NL ISO 3877 4 : 2005

Tyres, valves, and tubes – List of equivalent terms – Part 4: Solid Tyres

Document Number: NL 529 : 2005

This part of ISO 3877 gives a list of equivalent terms in English, French and Russian, relating to solid tyres as used in the tyre industry. Terms relating to tyres, tyre valves, and tubes are given in parts 1, 2 and 3 respectively. Definitions of certain terms given in the four parts of ISO 3877 are given in ISO 4223, Definitions of some terms used in the tyre industry. For terms relating to wheels/rims, and their definitions, see ISO 3911, Wheels/rims — Nomenclature, designation, marking, and units of measurement.

Toffee

Document Number: NL 530 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في التوفي المعد للاستهلاك المباشر

Gum

Document Number: NL 531 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في العلك المعد للاستهلاك المباشر

Wafers biscuits

Document Number: NL IEC 61056 1 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في رقائق البسكويت (الويفر) المعد للاستهلاك المباشر.

Portable lead-acid cells and batteries (Valve regulated types)- Part 1: General requirements, functional characteristics- Methods of test

Document Number: NL IEC 61056 2 : 2005

IEC 61056-1:2012 specifies the general requirements, functional characteristics and methods of test for all general purpose lead-acid cells and batteries of the valve-regulated type: - for either cyclic or float charge application; - in portable equipment, for instance, incorporated in tools, toys, or in static emergency, or uninterruptible power supply and general power supplies. This third edition cancels and replaces the second edition of IEC 61056-1 published in 2002. It constitutes a technical revision. The main changes consist in adding new battery designations and an update of the requirements like the one concerning the marking.

Portable lead-acid cells and batteries (Valve regulated types)- Part 2: Dimensions, terminals and marking

Document Number: NL ISO 12944 3 : 2005

This part of IEC 61056 specifies the dimensions, terminals and marking for all general purpose lead-acid cells and batteries of the valve regulated type : • for either cyclic or float charge application; • in portable equipment, for instance, incorporated in tools, toys, or in static emergency, or uninterruptible power supply and general power supplies. The cells of this kind of lead-acid battery may either have flat-plate electrodes in prismatic containers or have spirally wound pairs of electrodes in cylindrical containers. The sulphuric acid in these cells is immobilized between the electrodes either by absorption in a microporous structure or in a gelled form. This standard defines the dimensions of the batteries in length, height and width, as well as the shapes of the terminals. The lead-acid cells and batteries which are described in this standard should be tested according to the requirements of IEC 61056-1. This part of IEC 61056 does not apply for example to lead-acid cells and batteries used for • vehicle engine starting applications (IEC 60095 series), • traction applications (IEC 60254 series) or • stationary applications (IEC 60896 series). Conformance to this standard requires that dimensions, terminals and marking correspond to these requirements.

Paints and varnishes – Corrosion Protection of Steel Structures by Protective Paint Systems - Part 3: Design Considerations

Document Number: NL ISO 12944 4 : 2005

This document deals with the basic criteria for the design of steel structures to be coated by protective paint systems in order to avoid premature corrosion and degradation of the coating or the structure. It gives examples of appropriate and inappropriate design, indicating how problems of application, inspection and maintenance of paint systems can be avoided. Design measures which facilitate handling and transport of the steel structures are also considered.

Paints and varnishes – Corrosion Protection of Steel Structures by Protective Paint Systems - Part 4: Types of Surface & Surface Preparation

Document Number: NL EN 12864 : 2005

This document covers the following types of surfaces of steel structures consisting of carbon or low-alloy steel, and their preparation: — uncoated surfaces; — surfaces thermally sprayed with zinc, aluminium or their alloys; — hot-dip-galvanized surfaces; — zinc-electroplated surfaces; — sherardized surfaces; — surfaces painted with prefabrication primer; — other painted surfaces. This document defines a number of surface preparation grades but does not specify any requirements for the condition of the substrate prior to surface preparation. Highly polished surfaces and work-hardened surfaces are not covered by this document.

Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equa l to 4kg/h, and their associated safety devices for butane, propane or their mixtures

Sector: Petroleum and related Technologies

Document Number: NL EN 12790 : 2005

This European Standard defines the structural and operational characteristics, the safety requirements and test methods, the marking, of low-pressure, non adjustable regulators for butane, propane or their mixtures, referred to in body of the text as “regulators”. This European Standard covers regulators supplied at vapour pressure by one or several portable cylinders. They are normally directly connected to the cylinder vale or the self closing valve. The regulators covered by this standard are designed for a maximum outlet pressure of up to and including 200 mbar and a maximum rate of up to and including 4 kg/h. this European Standard also applies to the safety devices which are supplied as part of the regulators. The characteristics of these devices are given in annex A and B. The requirement of this European Standard apply generally to regulators used in location where temperature likely to be reached during use is between – 200 C and +50 0C,+50 0C being the maximum temperature allowable for the cylinder. When the devices are subjected to temperatures below this range, they shall comply with special requirements defined in annex C. Regulators designed for specific purposes (caravans and motor caravans) which are subjected to special requirements are dealt with in annex D. This European Standard does not include the installation rules for regulators and their possible associated safety devices. In this matter, reference should be made to national regulations in force in the member countries. Regulators which are intended to be used with gases containing methylacetylene and propadiene are excluded from the scope of this European Standard. WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators. The top part of these figures (above the horizontal line) applies to the regulator and is normative. The bottom part of these figures (below the horizontal line) applies to the tap (or the valve) to which the regulator if field. This I given as a guide for the tests and is not normative.

Child care articles - Reclined cradles

Sector: Domestic and Commercial Equipment. Entertainment.

Document Number: NL ISO 12944 6 : 2005

This standard specifies safety requirements and the corresponding test methods for fixed or folding reclined cradles intended for children up to a weight of 9 kg or who are unable to sit up unaided. This standard applies also to car seats complying with ECE 44 that can be used as reclined cradles according to manufacturer’s instructions. This standard does not apply to reclined cradles when used as swings. If a reclined cradle has several functions or can be converted into another function the relevant European standards apply to it (see Annex B).

Paints and varnishes – Corrosion Protection of Steel Structures by Protective Paint Systems - Part 6: Laboratory Performance Test Methods

Document Number: NL ISO 12944 7 : 2005

This document specifies laboratory test methods and test conditions for the assessment of paint systems for the corrosion protection of carbon steel structures. The test results are intended to be considered as an aid in the selection of suitable paint systems and not as exact information for determining durability. This document covers protective paint systems designed for application to uncoated steel, hot dip galvanized steel according to ISO 1461 and steel surfaces with thermal-sprayed metallic coating according to ISO 2063-1 and ISO 2063-2. This document does not apply to protective paint systems for electroplated or painted steel. The environments for corrosivity categories C2 to C5 and Im1 to Im3 defined in ISO 12944-2 are considered.

Paints and varnishes – Corrosion Protection of Steel Structures by Protective Paint Systems - Part 7: Execution & Supervision of Paint Work

Document Number: NL ISO 12944 8 : 2005

This document deals with the execution and supervision of paint work on steel structures in the workshop or on site. This document does not apply to — the preparation of surfaces to be painted (see ISO 12944-4) and the supervision of such work, — the application of metallic coatings, and — pre-treatment methods, such as phosphating and chromating, and paint application methods, such as dipping, powder coating or coil coating.

Paints and varnishes – Corrosion Protection of SteelStructures by Protective Paint Systems - Part 8: Development of Specifications for New Work & Maintenance

Document Number: NL EN 12200 2 : 2005

This document covers the development of specifications for corrosion protection of steel structures using protective paint systems. It relates to new work and maintenance in the workshop or on site and is also applicable to the corrosion protection of individual components. This document covers the corrosion protection of steel structures exposed to different corrosion stresses by environments such as indoors, open-air and immersion in water or burial in soil, as well as special stresses, due for example, to medium or high temperatures. The need for different durability ranges is considered. Steel surfaces that have been hot-dip-galvanized, metal-sprayed, zinc-electroplated or sherardized, and previously painted steel surfaces, are also covered by this document. In this document, reference areas for assessing the quality of the corrosion protection work and the performance of the protective paint systems used are dealt with. This document provides detailed flow charts for planning new

Plastics rainwater piping systems for above ground external use – Unplasticized Poly-Vinyl-Chloride (PVC-U) – Part 2: Guidance for the Assesment of Conformity

Document Number: NL IEC 60999 1 : 2005

This part of EN 12200 gives guidance for the assessment of conformity of formulations, products, joints and assemblies in accordance with EN 12200 1:2016 intended to be included in the manufacturer’s quality plan as part of the quality management system and for the establishment of third-party certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with EN 12200 1:2016, this document is applicable to piping systems made of unplasticized poly(vinyl chloride) (PVC-U) intended to be used for above ground external rainwater, and to fittings and brackets made of acrylic materials which may be used in combination with the pipes.

Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units – Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)

Document Number: NL IEC 60999 2 : 2005

IEC 60999-1:1999 Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 60228), rigid (solid or stranded) and/or flexible, having a cross-sectional area of 0.5 mm2 up to and including 35 mm2 and equivalent AWG sizes with a rated voltage not exceeding 1 000 V a.c. with a frequency up to and including 1 000 Hz, and 1 500 V d.c. It has the status of a horizontal standard in accordance with IEC Guide 104.

Connecting devices – Electrical copper conductors – Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors – Part 2: Particular requirements for conductors from 35 mm2 up to 300 mm2

Document Number: NL EN 12281 : 2005

IEC 60999-2:2003 Applies to screw-type and screwless-type clamping units for connecting devices, either as separate entities or as integral parts of equipment, for the connection of electrical copper conductors (complying with IEC 60228), rigid stranded and/or flexible, having a cross-section above 35 mm2 and up to and including 300 mm2 and equivalent AWG/kcmil sizes with a rated voltage not exceeding 1 000 V a.c. and a frequency up to and including 1 000 Hz and 1 500 V d.c. It applies to clamping units primarily suitable for connecting unprepared conductors. This standard does not apply to clamping units: - for connection by crimping or soldering; - for non-universal clamping units defined in 3.10.2 of IEC 60999-1. It has the status of a group safety publication in accordance with IEC Guide 104.

Printing and business paper - Requirements for copy paper for dry toner imaging processes

Sector: Paper Technology

Document Number: NL 663 2 : 2005

This European Standard specifies the performance requirements for uncoated cut-size paper for dry toner imaging processes (i.e. copy paper), in 80 g/m2 and in A4 format based on EN 20216. Other grammages and sizes of the ISO-A series are covered by this European standard, as long as the requirements specified in this European standard are fulfilled.

Motor Vehicles Using LPG - Accessories Fitted to the Container

Sector: Mechanical Systems and Components for General Use

Document Number: NL 663 3 : 2005

This Lebanese standard applies to the approval of accessories fitted to the container of motor vehicles using LPG in their propulsion system

Motor Vehicles Using LPG - Specific Equipment

Sector: Mechanical Systems and Components for General Use

Document Number: NL 663 4 : 2005

This Lebanese standard applies to the approval of specific equipment of motor vehicles using LPG in their propulsion system.

Motor Vehicles Using LPG - Test Procedures

Sector: Mechanical Systems and Components for General Use

Document Number: NL 663 5 : 2005

This Lebanese standard applies to the approval of test procedures, for components and accessories of motor vehicles using LPG in their propulsion system.

Motor Vehicles Using LPG - Code of Practice for Refuelling Stations

Sector: Mechanical Systems and Components for General Use

Document Number: NL 674 : 2005

This standard covers design, location, construction, maintenance and operation of L.P.G refueling facilities at: a) Retail outlets available to the general public for the sale of motor fuels (petrol stations) b) Motor refueling stations for L.P.G only available to the general public c) Other commercial and industrial premises for private application.

Non-alcoholic carbonated beverages

Document Number: NL 675 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في المشروبات الغازية غير الكحولية المعبأة والمعدة للاستهلاك المباشر.

Artificial drink powders

Document Number: NL 676 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في مساحيق الشرابات الاصطناعية المعبأ لا تطبق هذه المواصفات على مساحيق عصير الفاكهة الطبيعية

Dry soups

Document Number: NL 445 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في الشورباء الجافة المعبأة. لا تطبق هذه المواصفة القياسية على أنواع الشورباء التي تحتوي اللحم ومرق اللحم.

Mustard

Document Number: NL 446 : 2005

هو المنتج المحضر من خليط من بذور الخردل المطحونة أو مسحوق أو دقيق الخردل المنزوع جزء من زيته الثابت، أو من خليط منهما مع الملح والخل والمواد الاخرى المسموح بها في البند 4-3.

Cooked ham

Document Number: NL 447 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في المنتجات المسماة "فخذ الخنزير المطبوخ" المعبأة في أي من مواد التعبئة الملائمة المسموح بها. لا تطبق هذه المواصفة القياسية على منتجات فخذ الخنزير المطبوخ ذوي الخصائص التركيبية المختلفة عن تلك المحددة في هذه المواصفة، إذ يجب أن تسمى بعبارة تصف طبيعتها بحيث لا تؤدي إلى تضليل المستهلك أو إلى أي التباس مع المنتجات المحددة في هذه المواصفة القياسية.

Cooked pork shoulder

Document Number: NL 453 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في المنتجات المسماة "كتف الخنزير المطبوخ" المعبأة في أي من مواد التعبئة الملائمة المسموح بها. لا تطبق هذه المواصفة القياسية على منتجات كتف الخنزير المطبوخ ذوي الخصائص التركيبية المختلفة عن تلك المحددة في هذه المواصفة، إذ يجب أن تسمى بعبارة تصف طبيعتها بحيث لا تؤدي إلى تضليل المستهلك أو إلى أي التباس مع المنتجات المحددة في هذه المواصفة القياسية.

Fresh Beef, Mutton and Goat Meat

Document Number: NL 724 3 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في اللحوم الطازجة – لحوم البقر والجاموس والغنم والماعز المعدة للاستهلاك البشري.

Organic Production – Part 3: Forest managemenr

Document Number: NL 722 : 2005

Conversion defines the process of developing a certifiable, viable and sustainable forest management system. The time between the start of organic management and certification of the production is known as the conversion period.

Sampling plans for prepackaged foods (AQL 6.5)

Document Number: NL 723 : 2005

يطبق تصميم أخذ العينات الوارد في الملحق الأول من هذه المواصفة على عملية قبول الوحدات المعيبة الموجودة في دفعات المواد الغذائية المعبأة مسبقاً، كما هي محدّدة في المواصفات القياسية اللبنانية الخاصة، شرط أن تكون هذه المواصفات قد لحظت بشكل خاص استعمال التصميم المذكور أعلاه، بهدف قبول أو عدم قبول الدفعة. يجب أن يستعمل هذا التصميم بالتوافق مع الاشتراطات الخاصة بتصنيف العيوب وقبول الدفعة، المحددة في المواصفات القياسية اللبنانية التي يطبق عليها هذا التصميم، وضمن الحدود الموضحة في البند 2 من هذه المواصفة.

Recommended methods of sampling for the determination of pesticide residues for compliance with MRLs

Document Number: NL 724 1 : 2005

the objective of these sampling procedures is to enable a reprsentative sample to be obtained from a lot,for analysis to determine compliance with lebanse ,aximum residue limits(MRLs)for pesticides(NL 662-2202)

Organic Production – Part 1: Plants and Plant Products - livestock and livestock products, food processing and handling and beekeeping.

Document Number: NL 703 : 2005

1.1 This Standard shall apply to the following products, where such products bear, or are intended to bear, indications referring to the organic production method: (a) Unprocessed agricultural crop products; also livestock and unprocessed livestock products, to the extent that principles of production and specific inspection rules for them are introduced in Annexes I and III; (b) Processed agricultural crop and livestock products intended for human consumption prepared essentially from one or more ingredients of plant and/or animal origin; (c) Feedingstuffs, compound feedingstuffs and feed materials not covered under subparagraph (a). 1.2 By way of derogation from paragraph 1.1, where the detailed production rules are not laid down in Annex I for certain animal species, the rules provided for labeling in clause 4 and for the inspections (according to the framework regulation) shall apply for these species and the products therefrom, with the exception of aquaculture and aquaculture products. Pending the inclusion of detailed production rules, national rules or in the absence thereof private standards accepted or recognized by the competent authority shall apply. 1.3 For the purposes of this Standard, a product shall be regarded as bearing indications referring to the organic production method, where, in the labeling, advertising material or commercial documents, such a product, its ingredients or feed materials are described by the indication in use in Lebanon suggesting to the purchaser that the product or its ingredients or feed materials have been obtained in accordance with the rules of production laid down in subclauses 5.1 and 5.2, and in particular the following terms or their usual derivatives (such as bio, eco etc.) or diminutives, alone or combined, unless such terms are not applied to agricultural products in foodstuffs or feedingstuffs or clearly have no connection with the method of production: - in English: organic, - in French: biologique, - in Arabic: "عضوي" or "بيولوجي" 1.4 This Standard shall apply without prejudice to other national provisions, concerning products specified in subclauses 1.1 and 1.2, such as provisions governing the production, preparation, marketing, labeling and inspection, including legislation in foodstuffs and animal nutrition.

Whole dates

Document Number: NL 705 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في ثمار البلح والتمر الكاملة، المنزوعة أو غير المنزوعة النواة أو المحشوة، المعبأة للاستهلاك المباشر. لا تطبق هذه المواصفة القياسية على الثمار المعروضة في طرق عرض أخرى كالتمور المقطعة أو المهروسة أو المعدة لأغراض صناعية

Quick frozen whole kernel corn

Document Number: NL 711 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في حبوب الذرة الكاملة المجمدة، المعدة للاستهلاك المباشر بدون تصنيع إضافي، فيما عدا إعادة التعبئة. لا تطبق هذه المواصفة القياسية على المنتجات التي ستخضع لأي تصنيع إضافي، أو المعدة لأغراض صناعية أخرى.

Vegetable protein products (VPP)

Document Number: NL 712 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في منتجات البروتين النباتي الناتجة عن عدة عمليات استخلاص وفصل البروتين من مصادر نباتية مختلفة فيما عدا البروتينات وحيدات الخلية (Single cell proteins)، والمستعملة في الأغذية التي تتطلب تحضيراً إضافياً ومن قبل معامل التصنيع الغذائي. لا تطبق هذه المواصفة القياسية على منتجات البروتين النباتي التي لها مواصفات قياسية لبنانية خاصة بها.

Soy protein products

Document Number: NL 713 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في منتجات البروتين النباتي المحضرة من فول الصويا (بذور Glycine Max. L) بواسطة طرق استخلاص وفصل مختلفة، والمستعملة في الأغذية التي تتطلب تحضيراً إضافياً ومن قبل معامل التصنيع الغذائي.

General guidelines for the use of vegetable protein products in foods

Document Number: NL 714 : 2005

تهدف هذه المواصفة القياسية إلى تأمين الإرشادات اللازمة لاستعمال منتجات البروتين النباتي بطريقة آمنة وملائمة في الأغذية، وذلك عن طريق: - وضع المبادئ التي تضمن ملاءمة الجودة التغذوية للغذاء الذي يحتوي على منتجات البروتين النباتي، للاستعمال المقصود - تحديد المبادئ الخاصة بوضع البطاقة البيانية المناسبة على الأغذية التي تحتوي على منتجات البروتين النباتي. تطبق هذه المواصفة القياسية على جميع الحالات التي يستعمل فيها البروتين الناتج عن مصادر نباتية فيما عدا البروتينات وحيدات الخلية (Single cell proteins)، في الأغذية.

Macaroni (Spaghetti) and vermicelli

Document Number: NL 716 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في المعكرونة (الاسباجتي) والشعيرية المعبأة، المعدّة للاستهلاك المباشر

Baking Powder

Document Number: NL 696 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في مسحوق الخبيز المستعمل في عجين منتجات المخابز.

Canned asparagus

Document Number: NL 699 : 2005

تهدف هذه المواصفة القياسية الى تحديد المتطلبات والشروط الواجب توافرها في الهليون المعلّب المعد للاستهلاك المباشر

Packed or canned vine leaves

Document Number: NL 692 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في ورق العنب المعبأ أو المعلّب، المعدّ للاستهلاك المباشر

Edible gelatine

Document Number: NL 693 : 2005

تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في الهلام (الجيلاتين) الغذائي المعبأ

Canned Peaches

Document Number: NL 694 : 2005

تهدف هذه المواصفة القياسية الى تحديد المتطلبات والشروط الواجب توافرها في الدراق المعلّب المعد للاستهلاك المباشر

Canned apricots

Document Number: NL 695 : 2005

تهدف هذه المواصفة القياسية الى تحديد المتطلبات والشروط الواجب توافرها في المشمش المعلّب، المعد للاستهلاك المباشر

Canned artichokes

Document Number: NL EN 625 : 2005

تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في كعوب الأرضي شوكي (الخرشوف) المعلّبة المعدة للاستهلاك المباشر

Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal input not exceeding 70 KW

Sector: Mechanical Systems and Components for General Use