Document Number:
NL EN 1154 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
35000.0000
The scope is limited to manually operated door closing devices where the energy for closing is generated by the user upon opening the door, such that when the door is released, it returns to a closed position, in a controlled manner. Devices such as spring hinges, which do not exert a checking control during door closing, are outside the scope of this standard. Door closing devices (door closers) manufactured in accordance with this standard are recommended for use wherever there is a requirement for reliable closing control of a door.
Document Number:
NL EN 13427 : 2007
Sector:
Packaging and Distribution of Goods
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and a procedure by which a person or organization responsible for placing packaging or packed product on the market (the supplier) may combine the application of five (mandated) packaging standards and one (mandated) CEN report (in two parts).
Document Number:
NL EN 13428 : 2007
Sector:
Packaging and Distribution of Goods
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies a procedure for assessment of packaging to ensure that the weight and/or volume of its material content is at the minimum commensurate with the maintenance of : -functionality throughout the supply and user chain ; -safety and hygiene for both product and user/consumer ; -acceptability of the packed product to the user/consumer. This European Standard also specifies the methodology and procedure for determining the presence of the four heavy metals named in article 11 of the packaging and packaging waste Directive 94/62/EC and for determining the presence and minimisation of any dangerous substances or preparations if they are present in packaging and are likely to be released into the environment as a result of waste management operations. The procedures are referenced in CR 13695-1 and CR 13695-2. NOTE The substitution of one packaging material by another is not a basis for source reduction. This standard cannot by itself provide presumption of confor
Document Number:
NL EN 1304 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements for clay roofing tiles and fittings for pitched roof coverings and wall cladding and lining. It applies to all tiles and fittings as defined in Clause 3. Clay roofing tiles and clay fittings which conform to this European Standard are suitable for use as roof coverings, vertical wall cladding and lining. This European Standard defines the minimum requirements for a product which if satisfactory at the time of delivery will ensure that the product is able to perform its function in relation to the performance levels declared for it, whilst subjected to the changes that occur in such materials during normal conditions of use. The results obtained according to the European Standard apply to products at the time they are offered for sale.
Document Number:
NL EN 1869 : 2007
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This standard specifies requirements for fire blankets which are not re-usable and are intended for use by one person. It is applicable to fire blankets primarily intended for extinguishing cooking oil fires. NOTE: It is anticipated that they can also be used on fires involving personal clothing
Document Number:
NL EN 1935 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies requirements for single-axis hinges, of lift-off or fixed pin type, for use on access windows and doors. Such windows and doors may or may not be fitted also with door closing devices. It includes tests for static loads, shear strength and allowable wear during durability cycling for the following hinges: a)mounted on the edge of the door leaf or window sash and opening in one direction only; b)whose axis of rotation is within 30 mm of an edge of the movable element for a door leaf mass of up to 160 kg; c)whose axis of rotation is within 30 mm of the edge for a window sash with a mass up to 60 kg. This European Standard classifies hinges for four categories of use (see annex A) and also specifies the maximum permissible torque arising from frictional resistance generated within the hinge during endurance testing. Corrosion protection requirements are specified for those hinges which are not intended to be protected after fitting. There are no restrictions on the materials or the methods of fabrication used providing the hinge conforms to the requirements relevant to its application. The suitability of single axis hinges for use on fire/smoke compartmentation door assemblies is determined by performance tests conducted in addition to the performance tests required by this European Standard. Annex B indicates additional requirements for these products. This European Standard does not apply to hinges incorporating spring-assisted door-closing mechanisms. Door closers incorporating door co-ordinator devices (with or without electrically powered hold-open devices) are covered by EN 1158. Although the fastenings used to fix hinges to window assemblies and door assemblies are not covered by this European Standard, if the type of fastening to be used is supplied or specified by the manufacturer, such fastenings are used for the tests. NOTE Performance standards for complete windows and door assemblies (in the course of preparation byCEN/
Document Number:
NL EN TS 14578 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
25000.0000
This Technical Specification (CEN/TS) specifies recommended practices for the underground installation of piping systems made of glass-reinforced thermosetting plastics based on unsaturated polyester resin (GRP UP), intended to be used for pressure or non-pressure water or sewerage applications and complying with, as applicable, EN 14364 and/or EN 1796. It is applicable to GRP-UP piping systems of nominal sizes from DN 100 to DN 4000 which are intended to be used for the conveyance of liquids at temperatures up to 50 °C and at pressures of 0,5 bar and greater. Design procedures, the determination of long-term safety factors based on a semi-probabilistic approach, surge allowance and allowable negative pressures for buried GRP pipe applications are addressed in CEN/TS 14807 [1]. Piping systems conforming to EN 1796 or EN 14364 can also be used for above-ground applications provided the influence of the environment and the supports is considered in the design of the pipes and joints. It is recommended to refer to ISO/TR 10986 [4] for guidelines for the installation of above-ground flexible jointed pipes. NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
Document Number:
NL EN 13485 : 2007
Sector:
Metrology and Measurement. Physical Phenomena
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard sets the technical and functional characteristics for all types of thermometers (electronic, mechanical, etc.) for equipping the means used for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream and for measuring the internal temperature of the products. It specifies the test methods which allows the verification of the equipment's conformity to suitability and performance requirements.
Document Number:
NL BS 5866 1 : 2007
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This Part of BS 5566 specifies requirement for woven wool and woven wool/polyamide blankets intended for use in the public sector. It deals with the composition, manufacture, make-up, dimensions and colour of the blankets. Values are prescribed for percentage fiber content and mass per unit area, threads per unit warp and weft, breaking strength, dimensional change on washing and colour fastness. Note The titles of the publication referred to in the standard are listed on the inside back over
Document Number:
NL BS 5866 2 : 2007
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This Part of BS 5866 specifies requirements for the materials, manufacture, make-up, dimensions, physical properties and colour fastness of cotton leno cellular blankest suitable for use in the public sector. Requirements for both adults’ and children’s blankets are specified. NOTE The titles of the publications referred to in this Part of this British Standard are listed on the inside back cover
Document Number:
NL BS 5866 3 : 2007
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This Part of BS 5566 specifies requirements for synthetic fibre cellular blankets suitable for use in the public sector and particularly for areas that constitute a high life risk area. Requirements for adults’, children’s and infants’ blankets are specified. NOTE the titles of the publications referred to in this Parte of this British Standard are listed on the inside back over.
Document Number:
NL BS 5866 4 : 2007
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This Part of BS 5566 specifies requirements for the flammability performance of the blankets specified in Parts 1, 2 and 3 of BS 5866, when tested in both horizontal and vertical position in accordance with section 3 of S 7175:1989. NOTE The titles of the publications referred to in this Part of this British Standard are lusted on the inside back cover.
Document Number:
NL EN 13429 : 2007
Sector:
Packaging and Distribution of Goods
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies the requirements for a packaging to be classified as reusable and sets out procedures for assessment of conformity with those requirements including the associated systems. This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.
Document Number:
NL EN 13430 : 2007
Sector:
Packaging and Distribution of Goods
Status:
C
Production Year:
2007
Price:
35000.0000
This standard specifies the requirements for packaging to be classified as recoverable in the form of material recycling whilst accommodating the continuing development of both packaging and recovery technologies and sets out procedures for assessment of conformity with those requirements. This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.
Document Number:
NL EN 13431 : 2007
Sector:
Packaging and Distribution of Goods
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies the requirements for a packaging to be classified as recoverable in the form of energy and sets out procedures for assessment of conformity with those requirements. The scope is limited to factors under the control of the supplier. This standard cannot by itself provide presumption of conformity. The procedure for applying this standard is contained in EN 13427.
Document Number:
NL EN 13432 : 2007
Sector:
Packaging and Distribution of Goods
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies requirements and procedures to determine the compostability and anaerobic treatability of packaging and packaging materials by addressing four characteristics: 1) biodegradability; 2) disintegration during biological treatment; 3) effect on the biological treatment process; 4) effect on the quality of the resulting compost. In case of a packaging formed by different components, some of which are compostable and some other not, the packaging itself, as a whole is not compostable.
Document Number:
NL 744 : 2007
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2007
Price:
25000.0000
تختص هذه المواصفة القياسية ببطاقة المعلومات البيانية لجميع المنتجات الكيماوية المعبأة أو الموضبة والمصنعة محلياً أو المستوردة عدا المنتجات الغذائية والعقاقير.
Document Number:
NL 745 : 2007
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2007
Price:
25000.0000
تختص هذه المواصفة القياسية بالسجاد الأرضي المنسوج آلياً والمصنع باستخدام النوع المعروف من الأنوال الفردية، المزدوجة، أو أي نوع آخر من ماكينات السجاد المنسوج.
Document Number:
NL 724 4 : 2007
Sector:
Food Technology
Status:
C
Production Year:
2007
Price:
50000.0000
This standard establish the requirements for certification bodies operating within the organic sector, seeking Lebanese accreditation
Document Number:
NL 740 : 2007
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2007
Price:
15000.0000
تحدد هذه المواصفة القياسية الشروط الواجب تحققها في غاز النتروجين للاستخدام الصناعي المنتج مباشرة أو المعبأ في اسطوانات أو خزانات
Document Number:
NL ISO 7864 : 2007
Sector:
Health Care Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This International Standard specifies requirements for sterile hypodermic needles for single use of nominal outside diameters 0,3 mm and I,2 mm. It does not apply to dental needles
Document Number:
NL 754 : 2007
Sector:
Food Technology
Status:
C
Production Year:
2007
Price:
25000.0000
تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في السكريات المعدة للاستهلاك البشري دون أية معالجات أخرى. تشمل هذه المواصفة القياسية السكريات المباعة مباشرة للمستهلك، والسكريات المستخدمة كمكونات أساسية في المواد الغذائية
Document Number:
NL 755 : 2007
Sector:
Food Technology
Status:
C
Production Year:
2007
Price:
25000.0000
تطبق هذه المواصفة القياسية على الزيوت النباتية الواردة في البند رقم 3 والمعدة للاستهلاك البشري.
Document Number:
NL 751 : 2007
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2007
Price:
25000.0000
تحدد هذه المواصفة القياسية متطلبات الأداء الدنيا الواجب توافرها في مانع التجمد المعد للاستعمال بتمديدات مناسبة في أنظمة التبريد لجميع أنواع محركات الاحتراق الداخلي المبردة بالسوائل
Document Number:
NL ENV 12977 1 : 2007
Sector:
Energy and Heat transfer Engineering
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies requirements on durability, reliability and safety of small and large custom built solar heating and cooling systems with liquid heat transfer medium in the collector loop for residential buildings and similar applications. This document also contains requirements on the design process of large custom built systems.
Document Number:
NL ENV 12977 2 : 2007
Sector:
Energy and Heat transfer Engineering
Status:
C
Production Year:
2007
Price:
50000.0000
This European Standard applies to small and large custom built solar heating systems with liquid heat transfer medium for residential buildings and similar applications, and gives test methods for verification of the requirements specified in EN 12977-1. This document also includes a method for thermal performance characterization and system performance prediction of small custom built systems by means of component testing and system simulation. Furthermore, this document contains methods for thermal performance characterization and system performance prediction of large custom built systems. This document applies to the following types of small custom built solar heating systems: - systems for domestic hot water preparation only; - systems for space heating only; - systems for domestic hot water preparation and space heating; - others (e.g. including cooling). This document applies to large custom built solar heating systems, primarily to solar preheat systems, with one or more storag
Document Number:
NL ENV 12977 3 : 2007
Sector:
Energy and Heat transfer Engineering
Status:
C
Production Year:
2007
Price:
50000.0000
This Prestandard specifies test methods for the performance characterization of store which are intended for use is small custom built systems as specified in ENV 12977-1. Stores tested according to this Prestandard are commonly used in solar hot water system. However, also the thermal performance of all other thermal stores with water as storage medium (e.g. for heat pump systems) can be assessed according to this Prestandard.The Prestandard apploes to stores with a nominal volume berween 50 and 3000 litres and without integrated as oil or as gas burner.
Document Number:
NL ISO 7886 1 : 2007
Sector:
Health Care Technology
Status:
C
Production Year:
2007
Price:
35000.0000
This part of ISO 7886 specifies requirements for sterile Single-use hypodermic syringes made of plas- tics materials and intended for the aspiration of fluids or for the injection of fluids immediately after filling. lt excludes syringes for use with insulin (see ISO 8537), Single-use syringes made of glass, syringes with needles permanently attached, syringes for use with power-driven Syringe Pumps, syringes pre-filled with the injection by the manufacturer and syringes supplied with the injection as a kit for filling by a pharmaeist. NOTE 1 A second part of ISO 7886 is being prepared to cover syringes for use with power-driven Syringe Pumps
Document Number:
NL ISO 7886 2 : 2007
Sector:
Health Care Technology
Status:
C
Production Year:
2007
Price:
35000.0000
This part of ISO 7886 specifies requirements for sterile Single-use hypodermic syringes of nominal capacity 5 ml and above, made of plastics materials and intended for use with power-driven Syringe Pumps. This part of ISO 7886 does not apply to syringes for use with insulin (specified in ISO 8537), Single-use syringes made of glass (specified in ISO 595), syr- inges prefilled with the injection by the manufacturer and syringes supplied with the injection as a kit for filling by a pharmaeist. lt does not address compati- bility with injection fluids
Document Number:
NL ISO 7886 3 : 2007
Sector:
Health Care Technology
Status:
C
Production Year:
2007
Price:
25000.0000
This part of ISO 7886 specifies the properties and performance of sterile single-use hypodermic syringes with or without needle, made of plastic materials and stainless steel and intended for the aspiration of vaccines or for the injection of vaccines immediately after filling. Upon delivering a fixed dose of vaccine, the syringe is automatically rendered unusable. This part of ISO 7886 does not specify the design of the auto-disable feature, which is left to the discretion of the manufacturer. This part of ISO 7886 is not applicable to syringes for use with insulin (specified in ISO 8537), syringes made of glass (specified in ISO 595), syringes for use with power-driven syringe pumps (specified in ISO 7886-2), auto-disable syringes for variable dose delivery and syringes designed to be prefilled. It does not address compatibility with injection fluids/vaccines. NOTE A fourth part of ISO 7886 is being prepared to cover syringes with reuse prevention feature
Document Number:
NL IEC 61194 : 2003
Sector:
Electrical Engineering
Status:
C
Production Year:
2007
Price:
35000.0000
This International Standard defines the major electrical, mechanical and environmental parameters for the description and performance analysis of stand-alone photovoltaic systems. The parameters as listed are presented in a standard format for the purposes of procurement and performance analysis: - measurement of short - and long-term on-site photovoltaic-system performance; - comparison between on-site measured and projected performance, both extrapolated to standard test conditions (STC). Specialized documents related to specific applications and/or to specific uses (designing, performance prediction and measurement) may be issued, if necessary. NOTE - The minimum requirements, when applicable, are represented in boxes in the figures and the text. Recommended optional requirements are also given. Example UN nominal voltage minimum requirement W Weight optional requirement The numbering of subclauses is arbitrary and may not be the same for specific data sheets. 2003 EN/FR 35000.00 0
276 289 C NL IEC 61196 1 : 2006 NL TC IRI 33.120.10 60.60 Electrical Engineering RADIO-FREQUENCY CABLES – Part 1: Generic specification – General, definitions, requirements and test methods Specifies the general requirements, the definitions and the requirements for the design and test methods of coaxial communication cables. 2006 EN/FR 25000.00 0
277 290 C NL IEC 61196 3 1 : 2006 NL TC IRI 33.120.10 60.60 Electrical Engineering Radio-frequency cables- Part 3: Coaxial cables for digital communication in horizontal floor wiring- Section 1: Detail specification for cables of 500m reach and up to 10 Mb/s This publication supersedes IEC 61196-2-1. Look inside 2006 EN/FR 25000.00 0
278 291 C NL IEC 61196 3 2 : 2006 NL TC IRI 33.120.10 60.60 Electrical Engineering Radio-frequency cables- Part 3-2: Coaxial cables for digital communication in horizontal floor wiring: Detail specification for coaxical cables with solid dielectric for local area networks for 185 m reach and up to 10 Mb/s Relates to the subfamily of coaxial cables for digital communication. Should be used together with IEC 61196-1 and IEC 61196-3. Gives subfamily requirements and severities to be applied. 2006 EN/FR 35000.00 0
279 292 C NL IEC 61196 3 3 : 2006 NL TC IRI 33.120.10 60.60 Electrical Engineering Radio-frequency cables- Part 3-3: Coaxial cables for digital communication in horizontal floor wiring: Detail specification for coaxical cables with foamed dielectric for local area networks of 185 m reach and up to 10 Mb/s Relates to the subfamily of coaxial cables for digital communication. Should be used together with IEC 61196-1 and IEC 61196-3. Gives subfamily requirements and severities to be applied 2006 EN/FR 35000.00 0
280 293 C NL ISO 6743 99 : 2016 NL TC 28 75.100 60.60 Petroleum and related Technologies Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General This part of ISO 6743 establishes a general system of classification, which applies to lubricants, industrial oils and related products, designated by the prefix letter “L”. Within class L, 18 families of products are defined, according to the application areas of each, so as to cover, as much as possible, all the applications where lubricants, industrial oils and related products are used. The detailed classification of each family is given in other parts of ISO 6743. The classification only applies to new products. 2016 English 25000.00 1
281 294 C NL ISO 12922 : 2016 NL TC 28 75.120 60.60 Petroleum and related Technologies Lubricants, industrial oils and related products (class L) -- Family H (Hydraulic systems) -- Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU This International Standard specifies the minimum requirements of unused fire-resistant and less-flammable hydraulic fluids for hydrostatic and hydrodynamic systems in general industrial applications. It is not intended for use in aerospace or power-generation applications, where different requirements apply. It provides guidance for suppliers and end users of these less hazardous fluids and to the manufacturers of hydraulic equipment in which they are used. Of the categories covered by ISO 6743-4, which classifies the different types of fluids used in hydraulic applications, only the following are detailed in this International Standard: HFAE, HFAS, HFB, HFC, HFDR and HFDU. Types HFAE, HFAS, HFB, HFC and HFDR are “fire-resistant” fluids as defined by ISO 5598. Most HFDU fluids, while displaying an improvement in combustion behaviour over mineral oil, fall outside this definition and are more appropriately considered “less-flammable” fluids. NOTE For the purposes of this Internatio 2016 English 25000.00 1
282 295 C NL ISO 19378 : 2016 NL TC 28 75.100 60.60 Petroleum and related Technologies Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications This International Standard provides the manufacturers and users of machine tools with criteria for the choice among the various categories of lubricants and gives specifications for these lubricants. This International Standard facilitates the application of ISO 5169 relating to the presentation of lubrication instructions for machine tools. 2016 English 25000.00 1
283 296 C NL ISO IEC 7811 6 : 2016 NL JTC 1 35.240.15 60.60 Information Technology. Office Machines Identification cards — Recording technique — Part 6: Magnetic stripe — High coercivity This International Standard defines the characteristics for identification cards as defined in Clause 4 of this part of ISO/IEC 7811 and the use of such cards for international interchange. This part of ISO/IEC 7811 specifies requirements for a high coercivity magnetic stripe (including any protective overlay) on an identification card, the encoding technique, and coded character sets. It takes into consideration both human and machine aspects and states minimum requirements. Coercivity influences many of the quantities specified in this part of ISO/IEC 7811 but is not itself specified. The main characteristic of the high coercivity magnetic stripe is its improved resistance to erasure. This is achieved with minimal probability of damage to other magnetic stripes by contact while retaining read compatibility with magnetic stripes as defined in ISO/IEC 7811-2. This International Standard provides criteria to which cards are to perform. No consideration is given within this Internat 2016 English 35000.00 0
284 297 C NL EN 12085 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of linear dimensions of test specimens This European Standard specifies the characteristics and choice of measuring equipment and the procedure for determining the linear dimensions of test specimens which are taken from thermal insulating products. The procedures for measuring the dimensions of full size products are specified in EN 822 and EN 823. 2003 English; French 25000.00 0
285 298 C NL EN 12086 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of water vapour transmission properties This European Standard specifies the equipment and procedures for determining the water vapour transmission rate, water vapour permeance and water vapour permeability of test specimens in the steady state under different sets of specified test conditions. It is applicable to thermal insulating products. It is intended to be used for homogeneous materials and for products which may contain integral skins or facings of different material(s). A material is considered to be homogeneous, with regard to mass distribution, if its density is approximately the same throughout, i.e. if the measured density values are close to its mean density. This test method is not normally used for determining the water vapour transmission properties of single, separate vapour barriers (of high diffusion resistance), such as prefabricated films, foils, membranes or sheets, due to the long duration of the test. For products with a vapour retarder or barrier with a water vapour diffusion equivalent air layer thickness sd 1 000 m (see 3.6) other test methods e.g. IR-detection can be used for measuring the single separate vapour retarder or barrier, provided that the results obtained are in the same range as the values measured in accordance with this standard. The water vapour transmission rate and permeance values are specific to the test specimen (i.e. the product) thickness tested. For homogeneous products, the water vapour permeability is a property of the material. 2003 English; French 25000.00 0
286 299 C NL EN 12087 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of long term water absorption by immersion This European Standard specifies the equipment and procedures for determining the long-term water absorption of test specimens. It is applicable to thermal insulating products. This European Standard specifies two options: - Method 1 - partial immersion - Method 2 - total immersion The long-term water absorption by partial immersion is intended to simulate the water absorption caused by long term water exposure. The long-term water absorption by total immersion is not directly related to the conditions on site, but has been recognised as a relevant condition of test for some products in some applications. 2003 English; French 25000.00 0
287 300 C NL EN 12088 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of long term water absorption by diffusion This European Standard specifies the equipment and procedures for determining the long-term water absorption of test specimens by diffusion. It is applicable to thermal insulating products. It is intended to simulate the water absorption of products subjected to high relative humidities, approximating to 100 %, on both sides and subjected to a water vapour pressure gradient for a long period of time e.g. inverted roof or unprotected ground insulation. The test is not applicable for all types of thermal insulating products. The product standard should state for which of its products, if any, this test is applicable. NOTE For unprotected ground insulation, the temperature of 50 C might be replaced by a lower temperature, when more data is available. 2003 English; French 25000.00 0
288 301 C NL EN 12089 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of bending behaviour This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products. The test is designed to determine the bending strength of products and their deflection at a given load. The method can be used to determine the resistance of the product to bending stresses during transport and application. 2003 English; French 25000.00 0
289 302 C NL EN 12090 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of shear behaviour This European Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products. NOTE The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represent more closely the stresses imposed upon thermal insulation products in many building applications, particularly walls, than other methods of measuring shear performance e.g. bending tests. 2003 English; French 25000.00 0
290 303 C NL EN 12091 : 2003 NL TC EO 91.120.10 60.60 Mechanical Systems and Components for General Use Thermal insulating products for building applications - Determination of freeze-thaw resistance This European Standard specifies the equipment and procedures for determining the effect of successive cycling from dry conditions at -20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of the product. It is applicable to thermal insulating products. It is intended to simulate freeze-thaw effects on thermal insulating products which are frequently exposed to water and low temperature conditions, e.g. inverted roofs and unprotected ground insulation. This test method is not recommended for all thermal insulating products. If relevant, the product standards will state for which products this standard is applicable. 2003 English; French 25000.00 0
291 304 C NL EN 12098 1 : 2006 NL TC EO 91.140.10 60.60 Mechanical Systems and Components for General Use Controls for heating systems - Part 1: Outside temperature compensated control equipment for hot water heating systems This European Standard applies to electronic control equipment for heating systems with water as the heating medium and a supply water temperature up to 120 °C. This control equipment controls the distribution and/or the generation of heat in relation to the outside temperature and time and other reference variables. This standard covers also controllers that contain an integrated optimum start or an optimum start-stop control function. Safety requirements on heating systems remain unaffected by this standard. The dynamic behaviour of the valves and actuators are not covered in this standard. A multi-distribution and/or multi-generation system needs a coordinated solution to prevent undesired interaction and is not part of this standard. Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prEN ISO 52000 1. NOTE 1 In prCEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation. NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. 2006 English; French 35000.00 0
292 307 C NL EN 12200 1 : 2007 NL TC IRI 23.040.01 60.60 Construction Materials and Building Plastics rainwater piping systems for above ground external use – Unplasticized Poly-Vinyl-Chloride (PVC-U) – Part 1: Specificatons for Pipes, Fittings & the System This European Standard specifies the requirements for pipes, fittings, brackets and the system of unplasticized poly(vinyl chloride) (PVC-U) intended for use as above-ground external rainwater piping systems. It also specifies: a) The requirements for metallic brackets. b) Both solid wall pipes and fittings, (i.e. product manufactured from a single layer), as well as solid wall multi-layer pipes. c) The test parameters for the test methods referred to in this standard. Pipes can be used in conjunction with fittings and brackets of acrylic materials provided these polymers meet the performance requirements of this standard. The products are usually used in conjunction with gutters conforming to EN 607 [1]. They are not intended for use with products conforming to EN 612 [2]. This standard is applicable to PVC-U rainwater systems of circular, square, rectangular or any other shape with sealed (rubber ring or solvent cement) or unsealed joints. This standard covers a range of pipes and fittings sizes. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selections from the size range to take into account their particular requirements and any relevant national regulations and installation practices or codes. NOTE 2 The term rainwater" in this standard is used also to encompass "surface water" (as defined in EN 752 [6]) run-off from buildings.
Document Number:
NL ISO 12944 1 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
25000.0000
This document defines the overall scope of ISO 12944 (all parts). It gives some basic terms and definitions and a general introduction to the other parts of ISO 12944. Furthermore, it includes a general statement on health, safety and environmental protection, and guidelines for using ISO 12944 (all parts) for a given project.
Document Number:
NL ISO 12944 2 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
25000.0000
This document deals with the classification of the principal environments to which steel structures are exposed, and the corrosivity of these environments. This document — defines atmospheric-corrosivity categories, based on mass loss (or thickness loss) by standard specimens, and describes typical natural atmospheric environments to which steel structures are exposed, giving advice on the estimation of the corrosivity, — describes different categories of environment for structures immersed in water or buried in soil, and — gives information on some special corrosion stresses that can cause a significant increase in corrosion rate or place higher demands on the performance of the protective paint system. The corrosion stresses associated with a particular environment or corrosivity category represent one essential parameter governing the selection of protective paint systems.
Document Number:
NL 458 : 2007
Sector:
Food Technology
Status:
C
Production Year:
2007
Price:
25000.0000
تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في أغذية الأطفال المعلّبة. كما تشمل طرق أخذ العينات والاختبار وشروط التعبئة والتخزين والنقل. ولا تشمل هذه المواصفة القياسية الأغذية البديلة لحليب الأم للأطفال الرضّع، وأغذية الأطفال والرضّع المحضرة أساساً من الحبوب.
Document Number:
NL EN 12200 3 : 2007
Sector:
Construction Materials and Building
Status:
C
Production Year:
2007
Price:
35000.0000
This part of prEN 12200 gives recommended practices for the installation of piping systems made of unplastized poly(vinyl chloride) (PVC) in the field of external rainwater discharge systems for above ground use. It gives installation practices which are applicable to PVC-U rainwater discharge pipework based on pipes and fittings which conform to part 1 of prEN 12200. The existing general requirements that are applicable to the calculation of the sizing of rainwater installations in other materials are also valid for PVC-U systems. Reference are made to pipes and fittings manufactured in other materials which may be connected to the PVC-U piping components conforming to this standard and to the techniques of jointing to these dissimilar materials. This part of prEN 12200 provides recommended installation techniques but it is essential that the manufacturer’s fixing instructions and material handling advice ae taken into account to ensure good, sound and trouble-free rainwater downpipe systems. NOTE: The contente of clause 3 do not represent the full range of designs or variations of the ppes and fittings which may be used in the system.
Document Number:
NL EN 12094 1 : 2007
Sector:
ENVIRONMENT. HEALTH PROTECTION. SAFETY
Status:
C
Production Year:
2007
Price:
50000.0000
This European Standard specifies requirements and test methods for electrical automatic control and delay devices (e.c.d.) for use in combination with automatic fire detection and fire alarm systems and CO2-, Inert Gas- or Halocarbon Gas-Fire Extinguishing Systems installed in buildings. The standard specifies compulsory functions which shall be provided on all electrical automatic control and delay devices and optional functions (options with requirements) which may be provided. Additional functions associated with fire extinguishing can be provided, but are not covered by this standard.
Document Number:
NL EN 12094 2 : 2007
Sector:
Environment. Health protection. Safety
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies requirements and test methods for non-electrical automatic control devices incorporating non-electrical delay devices for CO2, inert gas- or halo-carbon-gas fire extinguishing systems. This European Standard applies to devices which may be triggered by: - automatic fire detection installation - electrical control device - non-electrical special fire detector - manual triggering device or - combination of the above. Where applicable the requirements and test methods also apply to separate non-electrical delay devices. This European Standard covers devices which are powered pneumatically, mechanically or by a combination of both.
Document Number:
NL EN 12094 3 : 2007
Sector:
Environment. Health protection. Safety
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and describes test methods for manual triggering and stop devices of CO2-, Inert Gas- or Halocarbon Gas fire extinguishing systems.
Document Number:
NL EN 12094 4 : 2007
Sector:
ENVIRONMENT. HEALTH PROTECTION. SAFETY
Status:
C
Production Year:
2007
Price:
35000.0000
This document specifies requirements and describes test methods for container valve assemblies for CO2- high-pressure-, Inert Gas- or Halocarbon Gas-fire extinguishing systems, which include a container valve, an actuator and possibly a diptube. This document specifies requirements and describes test methods for features of the component relevant only for its use in fire extinguishing installations. Diptubes not assembled to the container valves are not covered by this standard. NOTE Valve assemblies can be equipped with additional components (e.g. gauges and switches).
Document Number:
NL EN 12094 5 : 2007
Sector:
ENVIRONMENT. HEALTH PROTECTION. SAFETY
Status:
C
Production Year:
2007
Price:
35000.0000
This European Standard specifies requirements and describes test methods for selector valves and their actuators used in CO2 -, Inert Gas- or Halocarbon gas fire extinguishing systems.
Document Number:
NL EN 12094 6 : 2007
Sector:
ENVIRONMENT. HEALTH PROTECTION. SAFETY
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and test methods for non-electrical disable devices for CO2, Inert gas- or Halocarbon gas fire extinguishing systems. Examples are: a) an isolating valve in the pipework to the flooding zone or in a pneumatic pilot line; b) a device blocking the actuator at the bank of containers or the container valve in single-zone installations or the actuator of selector valves in multiple-zone installations.
Document Number:
NL EN 12094 9 : 2007
Sector:
Environment. Health protection. Safety
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and test methods for special fire detectors, other than fire detectors covered by EN 54-1, used in CO2-, Inert gas- or Halocarbon gas and other fire extinguishing systems. This European Standard covers special fire detectors, which react - by bursting of a glass bulb or - by melting of a fusible element
Document Number:
NL EN 12094 10 : 2007
Sector:
ENVIRONMENT. HEALTH PROTECTION. SAFETY
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and describes test methods for pressure gauges and pressure switches. This European Standard is applicable for pressure gauges for monitoring of pilot, control, alarm and storage containers of fire extinguishing systems filled with non-liquefied inert gases or pressurized halocarbon gases. This European Standard is applicable for pressure switches for monitoring of pilot, control, alarm and storage containers of fire extinguishing systems filled with non-liquefied inert gases or pressurized halocarbon gases and remote indication of leakage. This European Standard does not cover discharge indicating pressure switches.
Document Number:
NL EN 12094 11 : 2007
Sector:
Environment. Health protection. Safety
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and test methods for mechanical weighing devices for continuous monitoring of containers of CO2-, Inert Gas- or Halocarbon Gas-Fire Extinguishing Installations. This European Standard does not cover weighing devices for non-transportable containers which are filled and refilled on site, e.g. CO2-low-pressure containers.
Document Number:
NL EN 12094 12 : 2007
Sector:
Environment. Health protection. Safety
Status:
C
Production Year:
2007
Price:
25000.0000
This European Standard specifies requirements and test methods for surface mounted audible alarm devices powered by pneumatic energy (pneumatic alarm devices) to warn persons in flooding zones of CO2-, Inert Gas- or Halocarbon gas fire extinguishing systems.
Document Number:
NL ARI 450 : 2006
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2006
Price:
25000.0000
This standard establishes a single set of testing and rating requirements for determining heat rejection and water pressure drop for remote type, water-cooled refrigerant condensers; whereby, equipment performance ratings can be compared from product to product.
Document Number:
NL ARI 480 : 2006
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2006
Price:
25000.0000
this standard applies to remote type refrigerant-cooled liquid coolers of the shell and tube shell -and U-tube,shell-and u-tube,shell and coil, and tube in tube types using single compound refrigerants only
Document Number:
NL ARI 495 : 2006
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2006
Price:
25000.0000
This standard establishes for refrigerant liquid receivers: definitions, rating, requiremetns, minimum data requirements for published ratings; marking and maneplate data, and conformance conditions.
Document Number:
NL ASH 129 : 2006
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2006
Price:
25000.0000
This standard prescribes a method for measuring air-change effectiveness in mechanically ventilated spaces and buildings that meet specified criteria. The air-change effectiveness is a measure of the effectiveness of outdoor air distribution to the breathing level within the ventilated space. The method compares the age of air where occupants breathe to the age of air that would occur throughout the space if the indoor air were perfectly mixed. The standard includes measurement procedures and criteria for assessing the suitability of the test space for measurements of air- change effectiveness. (Standard reflects minor editorial changes 10-06-09)
Document Number:
NL ASH 126 : 2006
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2006
Price:
25000.0000
This standard shall be used to determine the structural strength, dimensional stability, durability, and leakage characteristics of HVAC air ducts. 2.2 This standard does not address the following: a. Fittings b. Effects of aerosols, solid particulates, corrosive environments, or combustibility c. Long-term effects of extended service d. Seismic qualifications e. Underground ducts f. Plenums and equipment casings g. Supports for ductwork and fittings