Document Number:
NL 475 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد الشروط الواجب توافرها في البطيخ الأصفر (الشمام) المعد للتسويق في حالة طازجة، وذلك عند مرحلة التوزيع، بعد التهيئة والتوضيب. لا تشتمل هذه المواصفة القياسية على البطيخ الأصفر (الشمام) المعد للتصنيع.
Document Number:
NL 477 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد الشروط الواجب توافرها في ثمار التفاح والأجاص المعدة للتسويق في حالة طازجة، وذلك عند مرحلة التوزيع، بعد التهيئة والتوضيب. لا تشتمل هذه المواصفة القياسية على ثمار التفاح والأجاص المعدة للتصنيع
Document Number:
NL 478 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد الشروط والمتطلبات الواجب توافرها في الخيار المعد للتسويق في حالة طازجة، وذلك عند مرحلة التوزيع بعد التهيئة والتوضيب. لا تشتمل هذه المواصفة القياسية على الخيار المعد للتصنيع.
Document Number:
NL 479 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد الشروط والمتطلبات الواجب توافرها في السبانخ المجمّدة المعدة للاستهلاك المباشر بدون تصنيع اضافي، فيما عدا التصنيف أو إعادة التعبئة. لا تشمل هذه المواصفة القياسية المنتجات التي ستخضع لأي تصنيع إضافي، أو المعدة لأغراض صناعية أخرى.
Document Number:
NL 480 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد الشروط الواجب توافرها في عنب المائدة المعد للتسويق في حالة طازجة، وذلك عند مرحلة التوزيع، بعد التهيئة والتوضيب. لا تشتمل هذه المواصفة القياسية على العنب المعد للتصنيع.
Document Number:
NL 516 : 2002
Sector:
Health Care Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تختص هذه المواصفة القياسية الاشتراطات والمتطلبات الواجب توافرها في غاز ثنائي أكسيد الكربون المعبأ في أسطوانات والمستعمل للأغراض الطبية
Document Number:
NL 500 : 2002
Sector:
Chemical Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تحدد هذه المواصفة القياسية المتطلبات العامة للإطارات الجديدة لسيارات الركاب السياحية التي تعبأ بالهواء المضغوط وطرق الاختبار
Document Number:
NL 501 : 2002
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد هذه المواصفة القياسية الشروط الواجب توافرها في زيت الوقود المتخلف الملائم للحرق في الأفران والمراجل لتوليد الطاقة الحرارية والطاقة في الوحدات الصناعية والقطارات الحديدية والسفن
Document Number:
NL 502 : 2002
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2002
Price:
35000.0000
تحدد هذه المواصفة القياسية المتطلبات الواجب توافرها في مائع كبح ذو أساس غير نفطي مستعمل في مركبات الطرق ذات أنظمة الكبح الهدروليكية المجهزة بحواكم أو أكواب أو حواكم سادة من النفط المزدوج الشفة مصنوعة من المطاط الطبيعي ومن مطاط الأستيرن – بوتاديين والمتماثر المطاطي الأتيلن – بروبيلن ذو الضغط المعالي، كما تحدد طرائق الفحص والاختبار.
Document Number:
NL 505 : 2002
Sector:
Information Technology. Office Machines
Status:
C
Production Year:
2002
Price:
50000.0000
This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. This standard is also applicable to such information technology equipment: ? designed for use as telecommunication terminal equipment and TELECOMMUNICATION NETWORK infrastructure equipment, regardless of the source of power; ? designed and intended to be connected directly to, or used as infrastructure equipment in, a CABLE DISTRIBUTION SYSTEM, regardless of the source of power; ? designed to use the AC MAINS SUPPLY as a communication transmission medium (see Clause 6, Note 4 and 7.1, Note 4). -- This standard is also applicable to components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and subassemblies, does comply. -- NOTE 1 Examples of aspects with which uninstalled components and subassemblies may not comply include the marking of the power rating and access to hazardous parts. -- NOTE 2 This standard may be applied to the electronic parts of equipment even if that equipment does not wholly fall within its Scope, such as large-scale air conditioning systems, fire detection systems and fire extinguishing systems. Different requirements may be necessary for some applications. This standard specifies requirements intended to reduce risks of fire, electric shock or injury for the OPERATOR and layman who may come into contact with the equipment and, where specifically stated, for a SERVICE PERSON. -- This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner prescribed by the manufacturer.
Document Number:
NL 514 1 : 2002
Sector:
Construction Materials and Building
Status:
C
Production Year:
2002
Price:
35000.0000
This Part of EN 12666 specifies the requirements for pipes, fittings and the system of polyethylene (PE) piping systems intended to be used for - non-pressure underground drainage and sewerage outside the building structure (application area code ""U""), and - non-pressure underground drainage and sewerage for both buried in the ground within the building structure (application area code ""D"") and outside the building structure. This is reflected in the marking of products by ""U"" and ""UD"". It also specifies the test parameters for the test methods referred to in this European Standard. This European Standard covers a range of nominal sizes, a range of pipe series/stiffness classes and gives recommendations concerning colours. NOTE 1 It is the responsibility of the purchaser or specifier to make the appropriate selection from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes. In conjunction with CEN/TS 12666-2 [1] it is applicable to PE pipes and fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for buried piping systems for non-pressure drainage and sewerage.This European Standard is applicable to PE pipes with or without an integral socket. The fittings can be manufactured by injection-moulding or be fabricated from pipes and/or mouldings. This European Standard is applicable to PE pipes and fittings for the following types of joints: - elastomeric ring seal joints; - butt fused joints; - electrofusion joints; - mechanical joints. NOTE 2 Requirements and limiting values for application area code ""D"" are given in Tables 3, 6 and Table 12. NOTE 3 Pipes, fittings and other components conforming to any of the plastics product standards listed in the bibliography may be used with pipes and fittings conforming to this European Standard, provided they conform to the requirements for joint dimensions given in Clause 6
Document Number:
NL 515 : 2002
Sector:
Health Care Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تختص هذه المواصفة القياسية الاشتراطات والمتطلبات الواجب توافرها في الأكسجين الطبي المستعمل في الملاحة البحرية وعمليات الإنقاذ وفي العمليات الجراحية وغرف الإنعاش وغرف العناية المشددة وغرف المرضى وحواضن الأطفال وسيارات الإسعاف. ولا تتضمن هذه المواصفة القياسية الأكسجين المستعمل للأغراض الصناعية والملاحة الجوية.
Document Number:
NL 517 : 2002
Sector:
Health Care Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد هذه المواصفة القياسية الاشتراطات والمتطلبات الواجب توافرها في غاز أكسيد النيتروز والمستعمل كمخدر في الأغراض الطبية
Document Number:
NL 518 : 2002
Sector:
Health Care Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد هذه المواصفة القياسية الاشتراطات والمتطلبات الواجب توافرها في الهواء المستعمل في الأغراض الطبية والإسعافات والاستعمالات التنفسية
Document Number:
NL 519 : 2002
Sector:
Health Care Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد هذه المواصفة القياسية الاشتراطات والمتطلبات الواجب توافرها في الآزوت الغاز والسائل المستعمل في الأغراض الطبية
Document Number:
NL 520 : 2002
Sector:
Health Care Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تطبق هذه المواصفة القياسية نظام الترميز باللون لتحديد محتويات قوارير الغاز المستعمل للأغراض الطبية مع الأخذ بالاعتبار خصائص الغاز أو مزيج الغازات.
Document Number:
NL 521 : 2002
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تختص هذه المواصفة القياسية بقماش التريكو القطني المستعمل في تصنيع الملابس الداخلية والخارجية المبيض أو المصبوغ (الفانيلات والسراويل والألبسة الرياضية وألبسة النوم وما شابه) والذي يتم إنتاجه بماكينات التريكو المستديرة.
Document Number:
NL 522 : 2002
Sector:
Textile and Leather Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تختص هذه المواصفة القياسية بقماش التريكو القطني الممزوج المستعمل في تصنيع الملابس الداخلية والخارجية المبيض أو المصبوغ (الفانيلات والسراويل والألبسة الرياضية وألبسة النوم وما شابه) والذي يتم إنتاجه بماكينات التريكو المستديرة
Document Number:
NL 159 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد الشروط والمتطلبات الواجب توافرها في ماء الورد الطبيعي الناتج عن أزهار الورد الجوري (Rosa damascena P. Miller).
Document Number:
NL 257 : 2002
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد هذه المواصفة القياسية المتطلبات والشروط الواجب توافرها في غازات النفط المسيلة (مزيج بروبان – بوتان) المعدة لتعبئة خزانات وقوارير غازات النفط المسيلة المستعملة كوقود لإغراض منزلية وصناعية.
Document Number:
NL 258 : 2002
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2002
Price:
35000.0000
تطبق هذه المواصفة القياسية على المدافئ العادية الأسطوانية الشكل التي تعمل على المازوت والمزودة بمحراق مبخار والمجهزة للوصل بمدخنة. تتضمن هذه المواصفة التعاريف والتركيب والأداء والاختبار، ولا تشمل المدافئ التي تتضمن عناصرا" مساعدة كهربائية مثل المراوح
Document Number:
NL 250 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في الكشك المعد للاستهلاك المباشر، ولا تشمل الكشك الأخضر.
Document Number:
NL 240 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في الخبز العربي اللبناني على أصنافه.
Document Number:
NL EN 263 : 2002
Sector:
Construction Materials and Building
Status:
C
Production Year:
2002
Price:
25000.0000
This European Standard specifies requirements and test methods for cross-linked cast acrylic sheets (called acrylic sheets hereafter) from which baths and shower trays for domestic purposes are manufactured. NOTE For the purposes of this standard, the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings, except when special medical provisions are required.
Document Number:
NL 227 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد هذه المواصفة القياسية المتطلبات والخصائص الواجب توافرها في الجبن الأبيض البلغاري. كما تشمل طرق أخذ العينات والاختبار وشروط التعبئة والتخزين والنقل
Document Number:
NL 234 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في عصير البرتقال المحفوظ فقط بالطرق الفزيقية
Document Number:
NL 196 : 2000
Sector:
Construction Materials and Building
Status:
C
Production Year:
2002
Price:
35000.0000
Le présent document a pour objet de définir les termes relatifs aux granulats, les règles générales permettant d'effectuer leur contrôle et de fixer les spécifications auxquelles doivent répondre les granulats pour les principaux usages. Seuls les articles 3 et 6 sont de portée générale (voir sommaire). Les dispositions particulières définies dans l'article 5 ne s'appliquent qu'aux caractéristiques spécifiées dans les articles 7 et suivants. La désignation d'un produit doit faire référence à la fois: - à la présente norme; - à l'un ou plusieurs des articles 7 et suivants correspondant à l'usage; - à une ou plusieurs catégories de cet ou de ces articles; et comprendre les indications suivantes: - granulométrie, - origine, - mode de préparation, - nature pétrographique. 2000 French 35000.00 0
585 610 C NL 197 : 2000 NL TC FP 93.020 60.60 Construction Materials and Building Roads Earthwork: Execution of Embankment La presente norme a pour objet de c1asser les sols naturels sur la base d'essais d' identification de laboratoi re, vis-a-vis des modalites de leur reemploi en remblai et de definir les classes des sols susceptibles d'etre utilises en remblai avec les principales modalites et d' eventuelles rest rictions. Elle comprend en annexe informative, un guide technique sur Ie compactage des remblais proposant une classification des compacteurs et des prescriptions de compactage permettant d' atteindre une qualite de mise en oeuvre compatible avec les objectifs de qualite habituels a ces tra vaux, ainsi qu'une methode de contr61e du compactage en continu. 2000 French 50000.00 0
586 611 C NL EN 198 : 2002 NL TC IRI 91.140.70 60.60 Construction Materials and Building Specifications for finished baths for domestic purposes made of acrylic material Cette norme europeenne fixe les specification des baignoires a usage domestique (1) en matieres acryliques qui assurent que le produit installe conformement aux prescriptions du fabricant donne des performances satisfaisantes. Cette norme ne fixe pas les exigences specifiques au montage des robinetteries sur les baignoires. Elle s applique en consequence auc baignoires a robinetterie murale . elle s applique aussi aux baignoires a robinetterie sur plage et doit , dans ce cas etre utilisee conjointement avec des specifications concernant l aptitude a l installation de la robinetterie , s il y a lieu . Cette norme s applique a toutes les dimensions et forms de baignoires . elle ne fixe pas les specifications relatives aux dimensions nominales ou dimensions de raccordement , ces derniers aspects pourraient etre couverts pas d autre norms. "
Document Number:
NL 221 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تحدد ھذه المواصفة القياسية البلدي المتطلبات والخصائص الواجب توافرھا في الجبن . كما تشمل طرق اخذ العينات والاختبار وشروط التعبئة والتخزين والنقل
Document Number:
NL 222 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تحدد ھذه المواصفة القياسية المتطلبات والخصائص الواجب توافرھا في الجبن الحلوم . كما تشمل طرق اخذ العينات والاختبار وشروط التعبئة والتخزين والنقل
Document Number:
NL 223 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تحدد ھذه المواصف العكاوي ة القياسية المتطلبات والخصائص الواجب توافرھا في الجبن . ولا تطبق ھذه المواصفة القياسية على الجبن العكاوي المصنع باستعمال البادئ. كما تشمل طرق اخذ العينات والاختبار وشروط التعبئة والتخزين والنقل.
Document Number:
NL 224 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد ھذه المواصفة القياسية المتطلبا ت والخصائص الواجب توافرھا في الجبن"الحلوة ." كما تشمل طرق اخذ العينات والاختبار وشروط التعبئة والتخزين والنقل
Document Number:
NL 225 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد ھذه المواصفة القياسية المتطلبات والخصائص الواجب توافرھا في جبن دوبل كريم . كما تشمل طرق اخذ العينات والاختبار وشروط التعبئة والتخزين والنقل.
Document Number:
NL 226 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تحدد ھذه المواصفة القياسية المتطلبات والخصائص الواجب توافرھا في الجبن "المجدولة ." كما تشمل طرق اخذ العينات والاختبار وشروط التعبئة والتخزين والنقل.
Document Number:
NL EN ISO 12543 5 : 2002
Sector:
Construction Materials and Building
Status:
C
Production Year:
2002
Price:
25000.0000
ISO 12543-5:2011 specifies dimensions, limit deviations and edge finishes of laminated glass and laminated safety glass for use in building.
Document Number:
NL EN ISO 12543 6 : 2002
Sector:
Construction Materials and Building
Status:
C
Production Year:
2002
Price:
25000.0000
ISO 12543-6:2011 specifies defects of finished sizes and test methods with regard to the appearance of laminated glass when looking through the glass. ISO 12543-6:2011 is applicable to finished sizes at the time of supply.
Document Number:
NL 654 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
25000.0000
يهدف هذا الملحق إلى تحديد طرق قياس حرارة المنتجات المجمدة، التي تستلزم ما يلي: - الحصول على حرارة دقيقة عند نقطة القياس باستعمال الأجهزة الملائمة - انتقاء عدد تمثيلي من مواقع قياس الحرارة للحصول على معلومات عن معدل حرارة الدفعة وعن تغيرات الحرارة داخل هذه الدفعة. يوصى باتباع طريقتين لقياس الحرارة، وهي: - قياس "الحرارة الداخلية للمنتج" - قياس "الحرارة السطحية للعبوة". يقصد بـ"حرارة المنتج" المذكورة في هذه المواصفة، الحرارة الداخلية للمنتج الموضحة في البند 6 من هذا الملحق.
Document Number:
NL 652 : 2002
Sector:
Food Technology
Status:
C
Production Year:
2002
Price:
15000.0000
تهدف هذه المواصفة القياسية إلى تحديد المتطلبات والشروط الواجب توافرها في البامياء المجمّدة المعدة للاستهلاك المباشر دون تصنيع إضافي، فيما عدا التصنيف أو إعادة التعبئة. ولا تشمل هذه المواصفة القياسية المنتجات التي ستخضع لأي تصنيع إضافي، أو المعدة لأغراض صناعية أخرى.
Document Number:
NL ISO 7308 : 2002
Sector:
Petroleum and related Technologies
Status:
C
Production Year:
2002
Price:
35000.0000
This International Standard lays down the characteristics and test methods for petroleum-based brake-fluids used in the hydraulic brake systems of road vehicles.
Document Number:
NL 406 0 : 2002
Sector:
Chemical Technology
Status:
C
Production Year:
2002
Price:
15000.0000
The present document classifies in six categories the different kinds of fires which can be defined in terms of the nature of the fuel. Such a classification is particularly useful in the context of fire fighting by means of an extinguishers.
Document Number:
NL 406 1 : 2002
Sector:
Chemical Technology
Status:
C
Production Year:
2002
Price:
25000.0000
This standard specifies the characteristics of description, of duration of operation, of residual charge and of the efficiency test applicable to portable fire extinguishers. Note 1: For classes of fires, please see Annex A of NL 406-5: 2001. Note 2: Classes of fire referred to in this standard corresponds to EN classification.
Document Number:
NL 406 2 : 2002
Sector:
Chemical Technology
Status:
C
Production Year:
2002
Price:
15000.0000
This standard specifies the tightness, the dielectric test, the tamping test and special provisions applicable to portable fire extinguishers.
Document Number:
NL 406 3 : 2002
Sector:
Chemical Technology
Status:
C
Production Year:
2002
Price:
25000.0000
This standard lays down technical specifications for extinguisher bodies and their accessories. It applies to the bodies of extinguishers in which the service pressure does not exceed 25 bar and to propellant gas cartridges. A specific clause gives requirements relative to carbon dioxide extinguishers' bodies.
Document Number:
NL 406 4 : 2002
Sector:
Chemical Technology
Status:
C
Production Year:
2002
Price:
15000.0000
This standard specifies the charges of portable fire extinguishers and the minimum required fire i.e, the maximum quantity of extinguishing medium that is to be used for the extinction of a given fire size. Note: Classes of Fire referred to in this standard corresponds to EN classifications.
Document Number:
NL 398 : 2002
Sector:
Paper Technology
Status:
C
Production Year:
2002
Price:
25000.0000
تجدد هذه المواصفة القياسية المتطلبات الواجب توافرها في الدفاتر المدرسية و الجامعية من حيث الجودة والقياس و عدد الأوراق او الصفحات و التسطير و الشكل و صنف الورق و الغلاف المستعمل.
Document Number:
NL prEN 12953 6 : 2002
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2002
Price:
35000.0000
This standard applies to shell boilers as defined on EN 12953-1. This Part of the European standard specifies rules for safety related equipment of shell boilers
Document Number:
NL prEN 12953 7 : 2002
Sector:
Mechanical Systems and Components for General Use
Status:
C
Production Year:
2002
Price:
35000.0000
1.1 Firing systems These requirements apply to oil and gas firing systems of steam and hot water generators. For multifuel firing systems using separate or combined these requirements shell apply to oil and/or gas firing part involved . Where several fuels are bumt simultananeously, improved safety measures may be necessary, especially in respect to limitation of heat input into the firing system and proper air supply to the individual fuels. For oil and gas firing system with one bumer per combustion chamber and a firing rate <15 MW these requirements are deemed to have been constructed in accordance with EN 276 or EN 676 and has been type-approved. In addition, however, the requirements of 4.3.3 shall be met unless they apply to the bumer itself. The requirements of 6.2, 6.5.3, 6.6.4, 6.7, 7 and 8 shall e met unless they are covered by the bumer type approval. In any case, bumers to EN 676 shall be equipped with a gas pressure monitor for monitoring the highest gas pressure. 1.2 Fuels These requirements cover the use of liquid and gaseous fuels as classified in the appropriate standards. Liquid fuel include light fuel oils, and heavy fuel oils which need preheating for proper atomization. For improvement of atomization, emulsions of heavy fuel oil with water may be used with appropriate precautions. Gaseous fuels of standardized quality are to be differentiated mainly by their relative density. Light gases with relative density below 1.3 are e.g natural gas according to ISO 6976, coke-oven gas, blast-fumace gas. Heavy gases with relative densities exceeding 1.3 are e.g liquefied petroleum gases, the main components of which’re propane and butan. Fuels deviating from standardized commercially available types may require extra safety measures . For black liquor such extra safety measures are given in annex B. 1.3 Operation The requirements for operational in clauses 4 to 8 apply to steam and hot water generators with permanent supervision by properly trained personal familiar with the special conditions of the firing system and the type of fuel being fired annex A comprises additional requirements for operational equipment for firing systems without permanent supervision.