Libnor | المعايير |

Document Number: NL EN 14496 : 2018

This European Standard specifies the characteristics and performance of thermal/acoustic insulation composite panels made of an insulating material laminated to gypsum boards for which the main intended use is the internal insulation (thermal and/or acoustic) of walls. They are attached with adhesives or by mechanical fixings to vertical solid backgrounds and by mechanical fixings to wood or metal framing with the gypsum board face exposed. The method of fixing and jointing should ensure that the insulating material is not exposed in its normal application. This European Standard covers the following performance characteristics: reaction to fire, fire resistance, water vapour permeability, flexural strength, impact resistance, direct airborne sound insulation and thermal resistance to be measured according to the corresponding European test methods. It provides for the assessment and verification of constancy of performance of the products to this European Standard. This European Standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction industry.

Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards - Definitions, requirements and test methods

Document Number: NL ISO 12480 1 : 2018

This European Standard specifies the characteristics and performances of gypsum based adhesives which are composed of gypsum plasters defined in EN 13279-1 and of additives. These adhesives are used for fixing to walls and partitions, gypsum board thermal/acoustic insulation composite panels according to EN 13950, gypsum plasterboard linings according to EN 520, gypsum boards with mat reinforcement according to EN 15283-1, gypsum fibre boards according to EN 15283-2 and other suitable products as reprocessed boards according to EN 14190 and cornices according to EN 14209. They assist in the construction of systems which provide thermal and acoustic performance. It covers the following performance characteristics: reaction to fire, fire resistance and bond strength to be measured according to the corresponding European test methods. It provides the assessment and verification of constancy of performance of the products. This standard covers also additional technical characteristics that are of importance for the use and acceptance of the product by the construction Industry and the reference tests for these characteristics.

Cranes - Safe use - Part 1: General

Sector: MATERIALS HANDLING EQUIPMENT

Document Number: NL ISO 15513 : 2018

This part of IS0 12480 establishes required practices for the safe use of cranes, including safe systems of work, management, planning, selection, erection and dismantling, operation and maintenance of cranes and the selection of drivers, slingers and signallers. It does not cover manually operated (non-powered) cranes, cranes in which at least one of its motions is manually operated and cranes mounted on water-borne vessels, except in those circumstances where a land-based crane is temporarily affixed to a vessel.

Cranes -- Competency requirements for crane drivers (operators), slingers, signallers and assessors

Document Number: NL ISO 23813 : 2018

This International Standard gives competency requirements applicable for the selection, training, assessment and verification of crane drivers (operators), slingers, signallers and their assessors. This International Standard does not cover additional competency requirements needed for special operations, e.g. man-lifting, pile-driving or pile-pulling. NOTE 1 Responsibilities for the performance of tasks are given in ISO 12480-1. However, personnel need to be aware of the responsibilities of others; inclusion in the training programme should not infer any changes in responsibilities. NOTE 2 For training of drivers (operators), see ISO 9926.

Cranes — Training of appointed persons

Document Number: NL ISO IEC 27033 2 : 2018

This International Standard specifies the minimum training needed to impart the requisite knowledge for a person appointed to control and manage the lifting operations of cranes. It is not applicable to the additional training required for those persons controlling and managing lifting operations involving dangerous goods or hazardous areas. NOTE 1 Responsibilities for the performance of tasks are given in ISO 12480-1. NOTE 2 For the training of drivers and operators, slingers and signallers, see ISO 9926-1 and ISO 23853, respectively.

NULL

Document Number: NL ISO IEC 27033 3 : 2018

ISO/IEC 27033-2:2012 gives guidelines for organizations to plan, design, implement and document network security.

NULL

Document Number: NL ISO IEC 27033 4 : 2018

ISO/IEC 27033-3:2010 describes the threats, design techniques and control issues associated with reference network scenarios. For each scenario, it provides detailed guidance on the security threats and the security design techniques and controls required to mitigate the associated risks. Where relevant, it includes references to ISO/IEC 27033-4 to ISO/IEC 27033-6 to avoid duplicating the content of those documents. The information in ISO/IEC 27033-3:2010 is for use when reviewing technical security architecture/design options and when selecting and documenting the preferred technical security architecture/design and related security controls, in accordance with ISO/IEC 27033-2. The particular information selected (together with information selected from ISO/IEC 27033-4 to ISO/IEC 27033-6) will depend on the characteristics of the network environment under review, i.e. the particular network scenario(s) and ‘technology' topic(s) concerned. Overall, ISO/IEC 27033-3:2010 will aid consi

NULL

Document Number: NL ISO IEC 27033 5 : 2018

ISO/IEC 27033-4:2014 gives guidance for securing communications between networks using security gateways (firewall, application firewall, Intrusion Protection System, etc.) in accordance with a documented information security policy of the security gateways, including: identifying and analysing network security threats associated with security gateways; defining network security requirements for security gateways based on threat analysis; using techniques for design and implementation to address the threats and control aspects associated with typical network scenarios; and addressing issues associated with implementing, operating, monitoring and reviewing network security gateway controls.

NULL

Document Number: NL ISO IEC 27033 6 : 2018

ISO/IEC 27033-5:2013 gives guidelines for the selection, implementation, and monitoring of the technical controls necessary to provide network security using Virtual Private Network (VPN) connections to interconnect networks and connect remote users to networks.

NULL

Document Number: NL EN 12520 : 2018

ISO/IEC 27033-6:2016 describes the threats, security requirements, security control and design techniques associated with wireless networks. It provides guidelines for the selection, implementation and monitoring of the technical controls necessary to provide secure communications using wireless networks. The information in this part of ISO/IEC 27033 is intended to be used when reviewing or selecting technical security architecture/design options that involve the use of wireless network in accordance with ISO/IEC 27033‑2. Overall, ISO/IEC 27033‑6 will aid considerably the comprehensive definition and implementation of security for any organization's wireless network environment. It is aimed at users and implementers who are responsible for the implementation and maintenance of the technical controls necessary to provide secure wireless networks.

Furniture - Strength, durability and safety - Requirements for domestic seating

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL EN 16121 : 2018

This European Standard specifies the minimum requirements for the safety, strength and durability of all types of domestic seating for adults. It does not apply to ranked seating, seating for non-domestic use, office work chairs, office visitors chairs, chairs for educational institutions, outdoor seating and to links for linked seating for which European Standards exist. It does not include requirements for the durability of upholstery materials, castors, reclining and tilting mechanisms and seat height adjustment mechanisms. It does not include requirements for electrical safety. It does not include requirements for the resistance to ageing, degradation, flammability and ergonomics. The tests are based on use by persons weighing up to 110 kg.

Non-domestic storage furniture - Requirements for safety, strength, durability and stability

Sector: Domestic and Commercial Equipment. Entertainment.

Document Number: NL ISO 2556 : 2018

This European Standard specifies requirements for the safety, strength, durability and stability for all types of non-domestic storage furniture. It does not apply to domestic storage, office storage, industrial storage, kitchen, catering equipment, retail storage !deleted text" and industrial storage lockers. Requirements for strength and durability do not apply to the structure of the building for example the strength of wall hanging cabinets includes only the cabinets and the parts used for attachment. The wall and the wall attachments are not included. It does not include requirements for the resistance to ageing, degradation and flammability.

NULL

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL ISO 11963 : 2018

Specification of the methodand of two types of suitable test apparatus. The plastic test specimen separates two chambers, the one contains the test gas at atmospheric pressure, the other of known initial volume has the air pumped out until the pressure is practically zero. The quantity of gas which passes through the specimen from one chamber to the other is determined as a function of time by measuring the increase in pressure occuring in the second chamber by means of a manometer.

NULL

Document Number: NL EN 14190 : 2018

This document specifies the requirements for solid, flat extruded sheets of polycarbonate (PC) for general applications. It applies specifically to sheets made of poly(p,p′-isopropylidene-diphenyl carbonate). The sheets can be coloured or colourless, and they can be transparent, translucent or opaque. The sheets can also be those that have a special weather-protective layer on one or both surfaces. This document applies only to thicknesses equal to or greater than 1,5 mm.

Gypsum board products from reprocessing - Definitions, requirements and test methods

Sector: CONSTRUCTION MATERIALS AND BUILDING

Document Number: NL EN 14195 : 2018

This European Standard specifies the characteristics and performance of products which have been produced by reprocessing gypsum boards manufactured according to EN 520, EN 15283 1 and EN 15283 2. Reprocessing may include cutting, perforating, edge profiling, decorating and laminating membranes of other materials for functional or decorative purposes, attaching fixings including supports e.g. for partitions. Examples of reprocessing operations are given in Annex B. The products are intended for use in wall, ceiling and floor applications, where they may be fixed directly to the background, or they are used in systems assembled in conjunction with the structure to form separate or suspended linings. The products can be customized to fit the intended application offering a wide range of aesthetic, functional and decorative solutions of modular or non-modular design. This European Standard does not cover gypsum board thermal/acoustic insulation composite panels according to EN 13950 and p

Metal framing components for gypsum board systems -Definitions, requirements and test methods

Document Number: NL EN 13963 : 2018

This European Standard specifies the characteristics of metal framing components (e.g. profiles, hangers and connectors) intended to be used in building construction works in conjunction with gypsum boards manufactured according to EN 520, EN 15283 1 and EN 15283 2 and gypsum board products from reprocessing conforming to EN 14190 where the assembly is non-loadbearing. Such assemblies include, for example, partitions, wall and ceiling linings, ceilings with mechanically fixed boards and the cladding of beams, columns, ducts and shafts. It covers the following performance characteristics: reaction to fire, flexural (yield) strength and loadbearing capacity of suspension components to be measured according to the relevant test methods as specified or cited in this European Standard.

Jointing materials for gypsum boards - Definitions, requirements and test methods

Document Number: NL EN 1129 1 : 2018

Specifies the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 230 Mbytes per cartridge. Specifies three related, but different implementations of such cartridges: Type R/W, type P-ROM and type O-ROM. Provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

Furniture – Foldaway beds- Safety requirements and testing – Part 1: Safety requirements

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL EN 1129 2 : 2018

This standard specifies requirements relating to the safety and strength of foldaway beds for domestic use. The standard also covers the strength of wall fastenings where applicable and doesn't specify the properties or materials or electrical equipment used in the construction of foldaway beds. folding beds, camping beds, and convertible beds /chairs or settees are not covered by this standard .for

Furniture – Foldaway beds- Safety requirements and testing – Part 2: Test methods

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL EN 1728 : 2018

This part specifies the test methods that asses the safety of .foldaway beds for domestic , camping beds, and convertible beds /chairs or settees are not covered by this standard

Furniture - Seating - Test methods for the determination of strength and durabilit

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL EN 267 : 2018

This European Standard specifies test methods for the determination of strength and durability of the structure of all types of seating without regard to use, materials, design/construction or manufacturing process. This European Standard does not apply to children’s highchairs, table mounted chairs and bath seats which are covered by other European Standards. Test methods for the assessment of ageing, degradation, ergonomics and electrical functions are not included. The test methods are not intended to assess the durability of upholstery materials, such as upholstery filling materials and upholstery covers. This European Standard does not include any requirements. Requirements for different end uses can be found in other Standards.

Automatic forced draught burners for liquid fuels

Sector: ENERGY AND HEAT TRANSFER ENGINEERING

Document Number: NL EN 676 : 2018

This European Standard specifies the terminology, the general requirements for the construction and operation of automatic forced draught oil burners and also the provision of control and safety devices, and the test procedure for these burners. This European Standard applies to automatic forced draught oil burners supplied with:  a fuel having a viscosity at the burner inlet of 1,6 mm²/s (cSt) up to 6 mm²/s (cSt) at 20 °C; and  higher boiling petroleum based first raffinates (viscosity greater than 6 mm2/s), that require preheating for proper atomisation. This European Standard is applicable to:  single burners fitted to a single combustion chamber;  single burners fitted to an appliance with additional requirements, then the relevant standard of this appliance shall be taken into account;  single-fuel and dual-fuel burners when operating on oil only;  the oil function of dual-fuel burners designed to operate simultaneously on gaseous and liquid fuels, in which case the

NULL

Document Number: NL ISO 15614 3 : 2018

Gives a non-exhaustive list of the botanical names and common names in English and French of plants or parts of plants used as spices or condiments. Replaces the first edition, which has been technically revised.

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 3: Fusion welding of non-alloyed and low-alloyed cast irons

Document Number: NL ISO 15614 4 : 2018

This part of ISO 15614 specifies how a preliminary welding procedure specification (pWPS) for production and repair welding of non-alloyed and low-alloyed cast irons is qualified by fusion welding procedure tests. This part of ISO 15614 defines the conditions for execution of the welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of a defined list of variables. This part of ISO 15614 is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to do the additional tests on a test piece made in accordance with this part of ISO 15614. Additional tests may be required by application standards. This part of ISO 15614 is applicable to welding non-alloyed and low-alloyed grey cast iron casting

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 4: Finishing welding of aluminium castings

Document Number: NL ISO 5817 : 2018

This part of ISO 15614 is one of a series of standards, details of which are given in ISO 15607:2003, Annex A. It specifies how a welding procedure specification for finishing welding of aluminium castings is qualified by welding procedure tests. It does not apply to repair welding. For joint welding, ISO 15614-2 applies. Arc welding of aluminium castings is covered by the following processes as defined in ISO 4063: 131 metal inert gas welding, MIG welding; 141 tungsten inert gas arc welding; TIG welding; 15 plasma arc welding. Other fusion welding processes by agreement. Shielding gases used in these processes are:  argon ISO 14175 I1;  helium ISO 14175 I2;  argon-helium mixture ISO 14175 I3. Other shielding gases by agreement.

Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections

Document Number: NL ISO 10245 1 : 2018

This International Standard provides quality levels of imperfections in fusion-welded joints (except for beam welding) in all types of steel, nickel, titanium and their alloys. It applies to material thickness ≥ 0,5 mm. It covers fully penetrated butt welds and all fillet welds. Its principles can also be applied to partial-penetration butt welds. (Quality levels for beam welded joints in steel are presented in ISO 13919-1.) Three quality levels are given in order to permit application to a wide range of welded fabrication. They are designated by symbols B, C and D. Quality level B corresponds to the highest requirement on the finished weld. Several types of loads are considered, e.g. static load, thermal load, corrosion load, pressure load. Additional guidance on fatigue loads is given in Annex C. The quality levels refer to production and good workmanship. This International Standard is applicable to a) non-alloy and alloy steels, b) nickel and nickel alloys, c) titanium and titanium

Cranes -- Limiting and indicating devices -- Part 1: General

Sector: MATERIALS HANDLING EQUIPMENT

Document Number: NL ISO 10245 2 : 2018

This part of ISO 10245 specifies general requirements for limiting and indicating devices for cranes that are applicable to loads and motions, performance and environment. These devices restrict operation and/or provide the operator or other persons with operational information. The specific requirements for the various types of crane are given in the other parts of ISO 10245. It is emphasized that the safe and reliable operation of limiters and indicators depends upon regular inspection and maintenance.

Cranes -- Limiting and indicating devices -- Part 2: Mobile cranes

Sector: MATERIALS HANDLING EQUIPMENT

Document Number: NL ISO 15614 1 : 2018

This part of ISO 10245 specifies the requirements for devices which limit and/or indicate the loads, motions, performance, and environment of mobile cranes. The general requirements for limiting and indicating devices for cranes are given in ISO 10245-1. This part of ISO 10245 applies to all mobile cranes as defined in ISO 4306-2. See 4.1 and also 4.2. NOTE Some basic machine types within this scope are convertible for use in excavating work and other applications not considered to be lifting service. The requirements of this part of ISO 10245 are applicable to such machines

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1:Arc and gas welding of steels and arc welding of nickel and nickel alloys

Sector: Manufacturing engineering

Document Number: NL ISO 15614 2 : 2018

This document specifies how a preliminary welding procedure specification is qualified by welding procedure tests. This document applies to production welding, repair welding and build-up welding. This document defines the conditions for the execution of welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the qualification of this document. The primary purpose of welding procedure qualification is to demonstrate that the joining process proposed for construction is capable of producing joints having the required mechanical properties for the intended application. Two levels of welding procedure tests are given in order to permit application to a wide range of welded fabrication. They are designated by levels 1 and 2. In level 2, the extent of testing is greater and the ranges of qualification are more restrictive than in level 1. Procedure tests carried out to level 2 automatically qualify for level 1 requirements, but not vice-versa. When no level is specified in a contract or application standard, all the requirements of level 2 apply. This document applies to the arc and gas welding of steels in all product forms and the arc welding of nickel and nickel alloys in all product forms. Arc and gas welding are covered by the following processes in accordance with ISO 4063. 111 — manual metal arc welding (metal-arc welding with covered electrode); 114 — self-shielded tubular-cored arc welding; 12 — submerged arc welding; 13 — gas-shielded metal arc welding; 14 — gas-shielded arc welding with non-consumable electrode; 15 — plasma arc welding; 311 — oxy-acetylene welding. The principles of this document may be applied to other fusion welding processes. NOTE A former process number does not require a new qualification test according to this document. Specification and qualification of welding procedures that were made in accordance with previous editions of this document may be used for any application for which the current edition is specified. In this case, the ranges of qualification of previous editions remain applicable. It is also possible to create a new WPQR (welding procedure qualification record) range of qualification according to this edition based on the existing qualified WPQR, provided the technical intent of the testing requirements of this document has been satisfied. Where additional tests have to be carried out to make the qualification technically equivalent, it is only necessary to perform the additional test on a test piece.

Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 2: Arc welding of aluminium and its alloys

Document Number: NL EN 15283 1 : 2018

ISO 15614-2:2005 specifies how a preliminary welding procedure specification is qualified by welding procedure tests. It applies to the arc welding of wrought and cast aluminium and its alloys. It does not apply to finishing welding of aluminium castings, which is dealt with by ISO 15614-4.

Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement

Document Number: NL EN 15283 2 : 2018

This European Standard specifies the characteristics and performance of gypsum boards with mat reinforcement intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum boards with mat reinforcement are selected for use according to their type, size, thickness and edge profile. The boards can be used for example to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses can be for floors, ventilation and smoke extraction ducts, cable trays and sheathing applications. This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance. The following performance characteristics are linked to systems assembled with gypsum boards with mat reinforcement: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If required, tests should be done according to the corresponding European test methods on assembled systems simulating the end use conditions. This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics. It provides for the evaluation of conformity of the product to this EN. This European Standard does not cover gypsum boards with mat reinforcement which have been subject to any secondary manufacturing operations (e.g. insulating composite panels, boards with thin lamination etc.). Products covered by EN 520 or EN 13815 are excluded.

Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards

Document Number: NL EN 15318 : 2018

This European Standard specifies the characteristics and performance of gypsum fibre boards intended to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster. Gypsum fibre boards are selected for use according to their type, size, thickness and edge profile. The boards may be used for example, to provide dry lining finishes to walls, to fixed and suspended ceilings, to partitions, or as cladding to structural columns and beams. Other uses may be for floors and sheathing applications. This European Standard covers the following product performance characteristics: reaction to fire, water vapour permeability, flexural strength, and thermal resistance. The following performance characteristics are linked to systems assembled with gypsum fibre boards: shear strength, fire resistance, impact resistance, direct airborne sound insulation, acoustic absorption. If required, tests have to be done according to the corresponding European test methods on assembled systems simulating the end use conditions. This European Standard also covers additional technical characteristics that are of importance for the use and acceptance of the product and the reference tests for these characteristics. It provides for evaluation of conformity of the product to this EN. This European Standard does not cover gypsum fibre boards that have been subject to any secondary manufacturing operations (e.g. insulating composite panels, boards with thin lamination etc.). Products covered by EN 520 or EN 13815 are excluded.

Design and application of gypsum blocks

Document Number: NL ISO IEC 29146 : 2018

This European Standard defines the rules for the design of gypsum blocks as specified in EN 12859, assembled with adhesives as specified in EN 12860. Accessory products are also defined in this document. It is applicable to non-loadbearing partition walls and internal insulation of walls in rooms of residential buildings, offices, hospitals, schools etc. and to linings of posts, beams, ducts, shafts etc, that are suitable to receive finishes such as paint and wallpaper without any prior traditional plastering, but having had normal preparation prior to painting. Certain components requiring special provisions are not covered by this standard and require special consideration.

Information technology — Security techniques — A framework for access management

Sector: Information Technology. Office Machines

Document Number: NL ISO IEC TR 29149 : 2018

ISO/IEC 29146:2016 defines and establishes a framework for access management (AM) and the secure management of the process to access information and Information and Communications Technologies (ICT) resources, associated with the accountability of a subject within some context. This International Standard provides concepts, terms and definitions applicable to distributed access management techniques in network environments. This International Standard also provides explanations about related architecture, components and management functions. The subjects involved in access management might be uniquely recognized to access information systems, as defined in ISO/IEC 24760. The nature and qualities of physical access control involved in access management systems are outside the scope of this International Standard.

NULL

Sector: Information Technology. Office Machines

Document Number: NL ISO IEC 29150 : 2018

ISO/IEC TR 29149:2012 explains how to provide and use time-stamping services so that time-stamp tokens are effective when used to provide timeliness, data integrity, and non-repudiation services in conjunction with other mechanisms. It defines: how time-stamp requesters should use time-stamp token generation services; how TSAs (time-stamping authorities) should provide a service of guaranteed quality; how TSAs should deserve trust based on good practices; which algorithms and parameters should be used in TST (time-stamp token) generation and TST renewal, so that TSTs resist during the time period during which the TSTs can be verified as being valid; how time-stamp verifiers should use the time-stamp token verification services, both when validating individual TSTs, and when validating sequences of renewal TSTs.

Technologies de l'information — Techniques de sécurité — Signcryptage

Sector: Information Technology. Office Machines

Document Number: NL ISO 13009 : 2018

ISO/IEC 29150:2011 specifies four mechanisms for signcryption that employ public key cryptographic techniques requiring both the originator and the recipient of protected data to have their own public and private key pairs. The methods specified in ISO/IEC 29150:2011 have been designed to maximize the level of security and provide efficient processing of data. All the mechanisms defined have mathematical "proofs of security", i.e. rigorous arguments supporting their security claims. ISO/IEC 29150:2011 is not applicable to infrastructures for management of public keys which are defined in ISO/IEC 11770-1 and ISO/IEC 9594.

Tourism and related services -- Requirements and recommendations for beach operation

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL ISO 20712 1 : 2018

This International Standard establishes general requirements and recommendations for beach operators that offer tourist and visitor services. It provides guidance for both beach operators and users regarding the delivery of sustainable management and planning, beach ownership, sustainable infrastructure and service provision needs, including beach safety, information and communication, cleaning and waste removal. This International Standard is applicable to beaches during the bathing season.

Water safety signs and beach safety flags -- Part 1: Specifications for water safety signs used in workplaces and public areas

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL ISO 20712 2 : 2018

ISO 20712-1:2008 prescribes water safety signs intended for use in connection with the aquatic environment. It is intended for use by owners and operators of aquatic environments and by manufacturers of signs and equipment. However, it is not applicable to signalling used for maritime traffic. The shape and colour required to be used for safety signs, as prescribed by ISO 3864-1, are given together with the graphical symbols contained within each sign. The water safety sign originals meet the design criteria of ISO 3864-3. ISO 20712-1:2008 specifies the water safety sign originals that may be scaled for reproduction and application purposes. ISO 20712-1:2008 includes water safety signs which require that supplementary text signs be used in conjunction with these water safety signs to improve comprehension.

Water safety signs and beach safety flags -- Part 2: Specifications for beach safety flags -- Colour, shape, meaning and performance

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL ISO 17557 : 2018

ISO 20712-2:2007 specifies requirements for the shape and colour of beach safety flags for the management of activities on coastal and inland beaches, to be used for giving information on wind and water conditions and other hazardous conditions, and to indicate the location of swimming and other aquatic activity zones extending from the beach into the water. It also specifies the colorimetric and photometric properties and the physical properties, including strength and colour fastness, of the materials from which beach safety flags are to be made. It is not applicable to flags for use on firing ranges or to flags for use to indicate water quality or to signalling used for maritime traffic.

Plastics — Film and Sheeting — Cast Polypropylene (PP) Films

Sector: Rubber and plastic industries

Document Number: NL ISO 18188 : 2018

ISO 17557:2003 specifies the requirements for cast polypropylene (PP) films, which are mainly used for packaging.

Specification of Polypropylene Drinking Straws

Sector: Rubber and plastic industries

Document Number: NL ISO 23560 : 2018

ISO 18188:2016 specifies the general characteristics, requirements and methods for testing of polypropylene (PP) drinking straws (herein after called PP straws). It is applicable to PP straws having an inner diameter of 3 mm to 12 mm.

Woven Polypropylene Sacks for Bulk Packaging of Foodstuffs

Sector: Sociology. Services. Company Organization and Mana

Document Number: NL EN 1130 1 : 2018

ISO 23560:2015 specifies the general characteristics, requirements, and methods of test for woven polypropylene (PP) sacks. It is applicable to woven PP sacks, having a capacity of 50 kg or 25 kg, intended for the transport and storage of foodstuffs, such as cereals, sugar, and pulses.

Furniture – Cribs and cradles for domestic use - Part 2: Test methods

Sector: Domestic and Commercial Equipment. Entertainment.

Document Number: NL EN 1130 2 : 2018

This part of European Standard prEN 1130 specifies safety requirements for cribs/cradles for domestic use. NOTE: If other items are added to the cribs/cradles, these should comply with the relevant product standards.

Furniture – Cribs and cradles for domestic use - Part 2: Test methods

Sector: Domestic and Commercial Equipment. Entertainment.

Document Number: NL EN 14988 : 2018

This part of prEN 1130 describes test methods that assess the safety of cribs and cradles for domestic use. The tests are designed to be applied to cribs/cradles that are fullly assembled and ready for use. NOTE: The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model.

Children's high chairs - Requirements and test methods

Sector: Domestic and Commercial Equipment. Entertainment.

Document Number: NL EN ISO 20957 9 : 2018

This European Standard specifies safety requirements for free standing children's high chairs that elevate children to dining table height usually for the purposes of feeding or eating. Children's high chairs are for children up to 3 years of age who are capable of sitting unaided. With the exception of special high chairs for medical purposes, this standard applies to children's high chairs for domestic and non-domestic use. NOTE If a children's high chair has to or can be converted into other functions, additional European Standards may apply.

Stationary training equipment -- Part 9: Elliptical trainers, additional specific safety requirements and test methods

Sector: DOMESTIC AND COMMERCIAL EQUIPMENT. ENTERTAINMENT.

Document Number: NL EN 13451 7 : 2018

ISO 20957-9:2016 specifies additional safety requirements for elliptical trainers in addition to the general safety requirements of ISO 20957‑1. ISO 20957-9:2016 specifies safety requirements for cardiovascular equipment with a closed pattern motion and/or a reciprocating motion, where the user's feet are designed to be in contact with the footplatform, but not including steppers, performed from either a standing or seated position.

Swimming pool equipment - Part 7: Additional specific safety requirements and test methods for water polo goals

Sector: Domestic and Commercial Equipment. Entertainment.

Document Number: NL ISO 20474 1 : 2018

This part of EN 13451 specifies safety requirements for water polo goals in addition to the general safety requirements of EN 13451-1:2001 The requirements of this specific standard take priority over those in EN 13451-1:2001. This part of EN 13451:2001 is applicable to manufactured water polo goals for use in competition and training.

Earth-moving machinery — Safety — Part 1: General requirements

Document Number: NL ISO 20474 2 : 2018

This document specifies the general safety requirements for earth-moving machinery as defined in ISO 6165, each of these requirements being common to two or more earth-moving machine families. It is also applicable to machine attachments, and to derivative machinery designed primarily for equipment used to excavate, load, transport, drill, spread, compact or trench earth, rock, and other materials. It is intended to be used in conjunction with the other parts of ISO 20474, which give the provisions that are specific to particular machine families. Those specific requirements take precedence over the requirements of this document for the machines concerned. For multipurpose machinery, all of those parts of ISO 20474 whose requirements cover the functions and applications of such machines are applicable. EXAMPLE For a compact loader also used as a trencher, the relevant requirements of ISO 20474-1, ISO 20474-3 and ISO 20474-10 are applicable. This document deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance. Specific requirements related to autonomous machines are covered in ISO 17757. This document is not applicable to machines manufactured before the date of its publication.

NULL

Document Number: NL ISO 20474 3 : 2018

ISO 20474-2:2017 gives the safety requirements specific to wheeled dozers and crawler dozers as defined in ISO 6165 as well as for the rear-mounted winches on dozers. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1. ISO 20474-2:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance. ISO 20474-2:2017 is not applicable to machines manufactured before the date of its publication.

Earth-moving machinery — Safety — Part 3: Requirements for loaders

Document Number: NL EN 115 2 : 2018

ISO 20474-3:2017 used in conjunction with ISO 20474-1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474-1. ISO 20474-3:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance. ISO 20474-3:2017 is not applicable to machines manufactured before the date of its publication.

Safety of escalators and moving walks - Part 2: Rules for the improvement of safety of existing escalators and moving walks (EN 115-2:2010) مؤسسة المقاييس والمواصفات اللبنانية -------- LIBNOR-------- Numéro de référence Reference Number NL EN 115-2:2018 (